2.2 turbo altezza

[popsy 09]

using the site a lot more lately so ill show ye what im up too :)hopefully wont be much longer just need to put everything back together now ha


started off like this

http://i1214.photobucket.com/albums/cc499/popsy2011/4.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/tez.jpg

but i like my fancy colours so off for a full respray :happy)

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0870.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0873.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0879.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0872.jpg

ended up like this ( colour very hard to get right in a photo )

http://i1214.photobucket.com/albums/cc499/popsy2011/4-1.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/6.jpg

wheel nuts
http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0871-1.jpg

trying on some 9j wheels which will be fitted soon once i find the right set

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0870-2.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0877-1.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0874-1.jpg


my recaros which will be fitted soon just waiting on passenger rail
http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0778.jpg



some nice defis ,have 5 in total

http://i1214.photobucket.com/albums/cc499/popsy2011/2.jpg


so thats pretty much up too yesterday and the spec was

C-West front bumper and skirts

rear lip

HKS full silent power exhaust with decat

HKS 4-2-1 Mani

HKS coilovers

Blitz SUS intake

Apexi SAFC II

TRD Yellow anti roll bars front and back

Cusco 2 Way diff

Cusco underbody braces

Works Emotion 17" wheels

4 brand new Toyo T1R just fitted

5 Defi gauges and control unit

Mint Recaro seat

brand new kenwood stereo

Momo s/w

TRD high Spoiler

UPDATE 1/7/11

now this is where it gets interesting today i bought me another altezza yes a full car , this will be the doner as it has a f**king massive spec list

2.2 stroked engine
apexi billet crank
apexi rods
custom machined forged pistons
acl bearings
metal headgasket
coilovers
sparco bucket seats
2way lsd
greddy intercooler kit
greddy turbo kit
emanage blue
greddy and hks gauges
exedy clutch
lightened flywheel
upgraded brakes
strut braces


i could go on lol

car is now in the garage im going stripping it tomorrow and inspecting everything as i now have 2 of lots of parts including 2 full turbo kits and now 3 emanage blue ecus lol

will take some pictures of the doner car over the weekend but it dont look like much not been driven in 10 months


so the plan is take what ever parts i need from the doner car and sell the rest , then possibly a td05 or td06 turbo and about 1.6 bar of boost and were off :happy) :happy) :happy)


will update over weekend with what work i get done :nuts) :nuts)

[popsy 09]

03/07/11

THE DONER CAR

well here is the beast was not driven in nearly 2 years but has a mega spec might not look it but most parts are next too new lol charged the battery too today out in gedis place and she was well able for buns in her sorry state sounds lovely with the turbo too

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0876-2.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0872-3.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0871-3.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0873-2.jpg

fancy interior ha ah

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0882.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0877-2.jpg

another emb

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0878-1.jpg

hks and greddy gauges

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0875-2.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0874-2.jpg


http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0883.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0884.jpg

61kms what a shame
http://i1214.photobucket.com/albums/cc499/popsy2011/DSCF0870-3.jpg



so next saturday when the garage is free we have a supercharged levin to finish for gedis first the stripping will start and see what im keeping and selling once everything is off mine will come out and the fun will start i reckon a month maybe two as im going doing a lot of cleaning and spraying ,undersealing to mine :)

im getting rid of the emb getting a full standalone must get bigger injectors ,a fuel pump ,boost controller , bigger rad and loads more i cant remember now ha ha

UPDATE 09/07/11

Started stripping today with kieran had a c**t of a day being honest every bolt was nearly siezed but we got there in the end lol

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0011.jpg


http://i1214.photobucket.com/albums/cc499/popsy2011/100_0029.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0027.jpg
grooved discs braided lines and konei pads

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0013.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0012.jpg


konei coilovers

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0022.jpg


http://i1214.photobucket.com/albums/cc499/popsy2011/100_0021.jpg

greddy intercooler

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0018.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0019.jpg

rear strut

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0020.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0031.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0023.jpg

td04 tubby which is totally fucked lol

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0024.jpg

will find it hard fitting a huge tubby here lol

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0025.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0037.jpg

also stripped all rocker covers ,inlet mani fuse box basically anything that can be sprayed so must get some primer and get that started

next weekend engine gearbox clutch and lsd is coming out and the head is coming off to get a new h/g and some arp bolts

after that its sell a few bits and get some more parts for the build once i have everything my car will go out and get engine taken out the bay sprayed and hopefully a big garrett turbo with external waste fitted

ROLL ON NEXT WEEKEND :) :)

[popsy 09]

UPDATE 16/07/2011

well most of the work done now its up to me to get some new parts now before i can go any further really will be doing a lot of cleaning and tidying up of parts now until i get sorted ,would like to sell a few bits really to free up some cash for new parts

looking for motec/haltech ecu and gt2871r turbo there the two major parts really only need fuel pump injestors small bits then :)

the challenge ahead
http://i1214.photobucket.com/albums/cc499/popsy2011/100_0065.jpg

no fancy garages for this build ha ha

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0069.jpg

easy as that
http://i1214.photobucket.com/albums/cc499/popsy2011/100_0070.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0068.jpg


http://i1214.photobucket.com/albums/cc499/popsy2011/100_0064.jpg

lovely exedy clutch and lightened flywheel
http://i1214.photobucket.com/albums/cc499/popsy2011/100_0071.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0073.jpg

diff out


http://i1214.photobucket.com/albums/cc499/popsy2011/100_0075.jpg

as it is now

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0072.jpg


going to take off head tmw in preperation for arp bolts and a fresh head gasket ,hopefully things sell now and we can keep moving on this one :)


24/07/2011

decided to strip engine to be 100 % sure on the build and it was just as well lol

bottom end was perfect

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0097.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0096.jpg

the head which last owner said the head gasket was gone ,dont know where he got that idea as it was perfect lol



http://i1214.photobucket.com/albums/cc499/popsy2011/100_0090.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0088.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0091.jpg

marking shims

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0092.jpg

here is where we found an issue now im no engine builder but surely using two different type of valves is not common practise lol

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0095.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0094.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0093.jpg


plan is to either use my head on the na car or else source two valves ,must decide soon as its holding us up ha ha


27/07/2011

just a few parts i picked up

arp bolts
ik22 plugs
cometic head gasket
walbro fuel pump
garrett 2871r turbo :)

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0113.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0115.jpg


UPDATE 30/07/11

ok took one step forward and about five back today ha ha , got the engine out of my own and got ready for painting the bay which will happen next week but the garett 2871r turbo is a no go :( with the design on my manifold the tubo just wont fit its too close to the block and fouling in loads of places so im going to have to settle for the td04 FOR NOW !!!

just going to get her set up see what she makes and look into getting a full new kit custom made to suit a massive tubby im absoulutely gutted as ill struggle to make 300 hp now but its only for the time being :(

[popsy 09]

on the plus note found a lovely lightened flywheel and exedy clutch in the car that i didnt know about :) so have shit loads of parts again for sale will make a donedeal ad tmw :)
http://i1214.photobucket.com/albums/cc499/popsy2011/100_0118.jpg
http://i1214.photobucket.com/albums/cc499/popsy2011/100_0122.jpg
http://i1214.photobucket.com/albums/cc499/popsy2011/100_0120.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0124.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0125.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0126.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0135.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0134.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0128.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0130.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0133.jpg



http://i1214.photobucket.com/albums/cc499/popsy2011/100_0141.jpg


http://i1214.photobucket.com/albums/cc499/popsy2011/100_0145.jpg



http://i1214.photobucket.com/albums/cc499/popsy2011/100_0147.jpg
going priming the bay monday and sorting a few small niggles

update 06/08/11

sprayed the bay today conditions are not ideal with the loom still in the bay and doing it in a dusty shed but pleased with the result looks dull in the pics but she is bling bling ha

going for ford thistle purple and to contrast it the rocker and all fuse boxes inlet mani etc are going a bright lime green ,i want the bay to be totally different so why not ha ha

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0159.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0155.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0167.jpg

couldnt finish anything in green as it needs a few coats so you will have to wait for them pics but we did get bored waiting for stuff to dry so we did a shot of green on my astra ha ha

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0161.jpg


waiting on shitloads of parts now but engine should be ready to go back in this week :)




update

17/08/2011

just some parts i have being collecting as i sell bits off the doner car
>avcr
>new front and back discs dimpled and grooved
>mintex pads
>purple catch can

there should be a beefy clutch too but finally customs caught me lol collecting it tmw

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0176.jpg

SPEC stage 4 clutch ,rated to 480 torque should just about hold the power ha ha
http://i1214.photobucket.com/albums/cc499/popsy2011/100_0178.jpg




wheels arrived monday along with a trd purple oil cap, :) collecting ecu saturday morning and my wideband will be here tomorrow all i need now is 550 injectors and im done :)then the fun begins ha ha

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0189.jpg

27/08/11

an expensive update ha ha

haltech p1000 standalone ecu and a innovate wideband kit

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0195.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0198.jpg

[popsy 09]

fitted trd mounts today along with clutch and re sealed the sumps which was a complete disaster of a job

went to fit engine and it went downhill after nearly an hour of fu**ing about we decided to leave it and come back next week with a fresh start too late in the day to be dropping gearboxes and ripping prop shafts lol
http://i1214.photobucket.com/albums/cc499/popsy2011/100_0209.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0211.jpg

i offered the wheels up to the car too fronts are perfect rear needs some stretch and camber alright ha ha excuse the dust

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0207.jpg
http://i1214.photobucket.com/albums/cc499/popsy2011/100_0206.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0205.jpg
http://i1214.photobucket.com/albums/cc499/popsy2011/100_0204.jpg

still waiting on parts for engine so did a few small jobs today

fitted new steering wheel and took out the rpm defi in the pillar pod and replaced it with the wideband gauge which is being tigersealed in as its 52mm and defis 60 mm lol but fits nicely now after a bit of butchering bt:)

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0223.jpg

got wheels on fronts are perfect may even run a 3-5 mm spacer when lowered rears definitely need work but there not so bad

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0221.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0220.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0218.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0217.jpg

how the engine is now ha , half in half out bits missing everywhere lol

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0215.jpg


update
forgot my camera but the engine is now in at long last all lined up and ready to rock , need to re seal the rocker cover and fit timing belt etc but the hard work is behind us , next up is gaskets and fit turbo kit intercooler etc and hopefully get her fired up on the standard ecu before we attempt to fit the haltech ha ha

mostly electricial and cosmetic parts to be fitted then :)

here is what was left of the doner car ha ha we smashed it pretty good :) we had a 320 bmw that we were messing in and got carried away and decided to have a destruction derby lol

http://i1214.photobucket.com/albums/cc499/popsy2011/2011-09-23153637.jpg

17/10/11

engine is finished :) just need to set the timing tomorrow and fit all the sprayed covers etc , didnt take much pics but today we
fitted the rear strut brace
walbro pump which is tricky enough much harder than a starlet anyway lol
re sealed rocker cover cover gasket
fitted gear knob
sorted wideband gauge
sorted the brakes with new fluid etc

tomorrow should see all the covers ,inlet mani on ,possibly turbo kit ,front mount and rear arches chopped :)
getting there now and its about f**king time

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0245.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0242.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0240.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0239.jpg

18/10/11

set back today with the cam gears turns out i need ne ones as i opened mine and there fuck*d once opened so that solves that problem i suppose

couldnt do a lot of things due to this but managed to fit the turbo kit anyway get the wideband kit sorted and wired in and get the bung welded into the downpipe

cant do much more now until i get new cam gears :(

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0251.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0249.jpg

some of the covers going on :)



http://i1214.photobucket.com/albums/cc499/popsy2011/100_0255.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0254.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/100_0253.jpg

on the look out for some nice purple stickers now to contrast the green :)

[98_glanza]

nice car.does she do hula hoops??

[popsy 09]

fuck me that was hard to do !!!!!

[damo1]

when u say u found a problem with the valves? y did u think uhave a problem with them?

[popsy 09]

i was unsure ,if you look at the exhaust valves two are different to the rest just never seen that before

[damo1]

i was unsure ,if you look at the exhaust valves two are different to the rest just never seen that before

the face of the valve makes no difference to it lad. all u want it to do is allow fumes out and once its seated correctley all is good

[popsy 09]

the face of the valve makes no difference to it lad. all u want it to do is allow fumes out and once its seated correctley all is good

i had the head off to be skimmed for a new metal headgasket and they told me all about it lol , learn something new everyday :afro: i never stripped an engine before so its all a learning curve to me :cool::cool:

[slithertooth]

Wasn't sure what was going on at the start but you seem to be going in the right direction, had a tubo tez before and personally would go down the jz road if i ever get one again, definetly gonna keep an eye on this one, best of luck with it

[popsy 09]

i went through all the options believe me,1jz ,2jz,sr20 etc etc but when the stroked engine popped up i went for it ,saves me a lot of custom work and still gives plenty of scope for more power

what did you run ??.5bar on standard engine ??

[slithertooth]

i went through all the options believe me,1jz ,2jz,sr20 etc etc but when the stroked engine popped up i went for it ,saves me a lot of custom work and still gives plenty of scope for more power

what did you run ??.5bar on standard engine ??

Yeah , mapped with power fc was easily the hardest car on fuel i'v ever had, mapped by treacy:), got a tt supra after it that was better on juice than it:D
Would get another tez in a heartbeat, great all round car

[popsy 09]

what power did ya make ? ill berunning the same turbo (td04 i presume) for a while only more boost, till i get a bigger kit sorted

ya i say the mpg will be fun on mine ha

[daz1996]

any chance that bmw is for sale? :D :L

[slithertooth]

Ran 253bhp at the wheels if i'm correct,torque was similar.Same turbo and greddy set up, pulled like a train though needed a decent head gasket and gt4 injectors to run more boost but the supra came up so it got a new home. Stuff wasn't cheap for it though but sounds like you found a gem in the donor

[POC]

Great thread, love the colour choices! Keep the updates coming

[NoelB]

Brilliant build man. Best of luck with it

[Danjordan]

great build best of luck with it!!

[KerryKid1JZ]

great read man glwb!

[S13..KEV]

class.friend of mine used to own that.minded it like a baby.best of luck with her

[popsy 09]

did a few bits over the weekend should have engine in now saturday :)

ordered me some tires ,injectors ,dished steering wheel and a dildo gearknob ,should be here within the next week:afro:

i need camber arms for the rear as you can see in the pics ,altezzas are very tricky to run anything with a bit of dish :mad::mad:

[SIMO]

Cool project lad,love the color of the car its different!! Nice few parts u gathered up there best of luck with the build!!!

[jamieae111]

great build followed this on tezzaworld :) wish mine was like this :P

[popsy 09]

few more bits done today:p

[whiskeyjack88]

she coming along nicely now bud :cool:
you might actually get her out and about for a bit before the bad weather sets in for the winter

[Darenm]

Popsy u never seem 2 amaze me wit the glanza and now this love the colour not to sure bout the wheels just yet but not goin 2 jump cos havent seen it sitting some matt black rota gtrs wit low off set would b sweet but thats just my oppinion cars coming along nicely its nice 2 see a different project rather than an s body

[popsy 09]

making progress on this but need some cam gears for it :( anyone got any for sale

added a few pics too

[popsy 09]

did what we could today cam pulleys seriously holding us up but im on it

not much pics as i only had the phone

fitted the recaros on the bride rails and in the car
finished fitting turbo kit
wideband kit fitted
arches cut

next week should see it running if i can get cam pulleys :)

http://i1214.photobucket.com/albums/cc499/popsy2011/2011-10-29103642.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/2011-10-29122428.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/2011-10-29122501.jpg

http://i1214.photobucket.com/albums/cc499/popsy2011/2011-10-29144712.jpg

[sil8094]

should be savage when its done

[andy t]

savage build man


love it .....

[popsy 09]

things just didnt work out with this ,its now being broke for parts if ya need any bits :(:(

[dermot-r32]

awh man.thats sick when you did so much...something go wrong with it or personal reasons?:(

[popsy 09]

awh man.thats sick when you did so much...something go wrong with it or personal reasons?:(

basically got fucked around when buying parts that i needed to finish it dont ever trust donedeal ha ha lesson learned anyway time to move on

[Maurice.]

Pm me a price on the clutch and flywheel if ya can

[B&G Extreme Drifting]

Aw man don't break it,your so close to having an ultimate car some build!!

[popsy 09]

Pm me a price on the clutch and flywheel if ya can

its sold man sorry


Aw man don't break it,your so close to having an ultimate car some build!!

too late it has started already ha ha

[tommiii]

cnt believe she wont be finished was looking so forward to seen the final result..

such a lovely car inal:(

[Driftma]

i'd be interested in a price on the bottom end

[popsy 09]

Bottom end is sold.along with shell coilovers and hks exhaust

i could.do with shifting the weds alloys with new tires, greddy turbo wit with intercooler and haltech ecu if ya know.anyone