View Full Version : banded steels
hachi.roku
25-07-11, 19:01
Right this is a group buy for banded steels from KL developments.
*15x6 two banded to 15x8 and two banded to 15x8.5 powdercoated silver -----price 300 euro +45 euro powder coat
*15x6 two banded to 15x8 and two banded to 15x8.5 not powdercoated------price 300 euro
*13x5.5 two banded to 13x8 and two banded to 13x9 powdercoated silver----- price 290 euro+ 45 euro powder coat
*13x5.5 two banded to 13x8 and two banded to 13x9 not powdercoated----- price 290 euro
*14x6 two banded to 14x8 and two banded to 14x9 powdercoated silver ------- price 290 euro + 45 euro powder coat
*14x6 two banded to 14x8 and two banded to 14x9 not powdercoated ------ 290 euro
Shipping Prices are €2 per kg each way.
The steels can either be delivered to him in Dublin or I will bring them to Dublin if you either courier them to me or Ill collect them on the way to Dublin.(route is From Mountbellew via Athlone and motorway from there) Ill do this for free.
To make it worthwhile ill need 10 sets Including mine.
Pm as well as posting here with contact details and specs and payment method.
Matt
1. Matthew 15x6 g60s to 15x8 and 15x8.5
2.
3.
4.
5.
6.
7.
8.
9.
10.
Contact Info driftdevelopment@gmail.com
sorry but i am going make my self look stupid now but wot is this stuff for
hachi.roku
25-07-11, 19:34
banding steels wheels to look like these..
http://i1112.photobucket.com/albums/k491/mattpolo/post-30680-1306496777.jpg
http://i1112.photobucket.com/albums/k491/mattpolo/post-30680-1299447475.jpg
http://i1112.photobucket.com/albums/k491/mattpolo/2881286015_9950fd45cb.jpg
http://i1112.photobucket.com/albums/k491/mattpolo/diksi-plataki.jpg
Do I have to supply my own steelies?
hachi.roku
25-07-11, 20:43
Yeah you do ;) You'd pick a set up cheap anyway outta a scrap yard :)
where do I take them to and how long will they take to come back?
theres a lad in cork does these for 75euro a wheel but you supply the wheel and as far as i know they cant be balanced
hachi.roku
25-07-11, 22:28
Yeah these are cut on a cnc lathe and welded with an automatic welder so should be a butter job than the lad in cork. Ill be bringing sets up to the guy in about two or three weeks. They take 2-3 weeks to come back but mainly because they have to be shipped abroad
theres a lad in cork does these for 75euro a wheel but you supply the wheel and as far as i know they cant be balanced
You know the guy in cork that does this? Any number for him? please and thanks!
You know the guy in cork that does this? Any number for him? please and thanks!
Theres a few here. But if they can't be balanced, they can't be done right or done safe. Google banded steels splitting and the likes before you do anythng.
The above offer is bang on the money.
hachi.roku
25-07-11, 23:56
Cheers Keith ;)
What price did i give you (or did i give you one) for the 16" steels because i cant find the e-mail
babyeater690
26-07-11, 16:39
do i supply the wheels for that price or what and is the shiping included in the 350 price or is that on top of the 350
little confused on this but to make a set of 4 banded steels how many steelies must be supplied, 8??
hachi.roku
27-07-11, 00:35
Shipping on top and you just supply 4 steels
hachi.roku
29-07-11, 11:42
Any intertest??
Any idea of anywhere that has some 16" steelies in 4x100 with a 57.1 centre bore fitment (Renault scenic spares fit) as they don't have any around here or within a reasonable distance. I need 6 done if they can be found;)
hachi.roku
31-07-11, 03:43
6 of them would be roughly €450 then add €75 if u want paint and then add postage afaik
So worth it
babyeater690
04-09-11, 20:30
lad il get a set done will you be at jap fest
hachi.roku
11-09-11, 16:10
Yeah he'll do just the two alright. Am no obviously im not at japfest :lol:
hachi.roku
11-09-11, 16:15
First post updated with e-mail address. I havent the time to organise this now :(
DaveM-sport
12-09-11, 21:04
theres a lad in cork does these for 75euro a wheel but you supply the wheel and as far as i know they cant be balanced
Interesting...
I remember one of the wheels he done a few years ago nearly knocked a tyre fitter on the floor in amazement as it only needed something like a 5 or 10g weight to balance it :)
I done a few and did some 25" wheels recently by 4" but as the chariot that they were going on does no more than 20-25mph, balancing didn't matter as much in that case... just needed to be strong as it weighs 10 tonnes, lol
CNC lathe wouldn't make much of a difference unless somebody is just cutting them with a gas-torch or grinder but an automatic pipe-welder makes a brilliant job of them.
I must see how much CIT would let the one they never use go for some day :p
First post updated with e-mail address. I havent the time to organise this now :(
This gone back to your guy or mine?
hachi.roku
12-09-11, 21:58
Mine keith. Feel free to post Jervis's info here too (on this thread) :P ;)
Mine keith. Feel free to post Jervis's info here too (on this thread) :P ;)
Nope, i will not invade your thread. :p
Was just curious.
hachi.roku
12-09-11, 22:30
Sure you can. Im not worried about this anymore. This thread has a bitta interest anyway so fire ahead let the buyers decide :P
MartyMoore
12-09-11, 22:54
Banded steels can be balanced no problem. I have done a few sets and never put more the 30gs on a wheel.
I would love to get a set done for the cam but what has a 14 or 15x114.3 steel?
Banded steels can be balanced no problem. I have done a few sets and never put more the 30gs on a wheel.
I would love to get a set done for the cam but what has a 14 or 15x114.3 steel?
15" g60 steels in 4x100 with adapters. You'll be adding spacing anyway for stance so it'll work out lovely.
DaveM-sport
13-09-11, 00:35
I'm looking for some Renault wheels so I can make another couple of sets to put on my E30s and things for the winter months :)
I'm looking for some Renault wheels so I can make another couple of sets to put on my E30s and things for the winter months :)
What size?
DaveM-sport
13-09-11, 01:22
Looking for some 16s but must get 4 or 6 15s too if I can.
VW wheels will do for the 15s but must try find some senic or mini wheels for 16"s.
Had some that I had banded in all that just had to be blasted down and sent off for powder-coating with some other bits but a friend twisted my arm for them, lol.
Looking for some 16s but must get 4 or 6 15s too if I can.
VW wheels will do for the 15s but must try find some senic or mini wheels for 16"s.
Had some that I had banded in all that just had to be blasted down and sent off for powder-coating with some other bits but a friend twisted my arm for them, lol.
Ah right, I'm looking to swap my 14" banded g60 steels for some nice 16' normal alloys. Bit schmall for you.
DaveM-sport
13-09-11, 01:47
yeah, bit small really although they didn't look bad on Eric's E30 really.
banding them isn't a problem anyway, its just finding a few sets of the wheels is the tricky bit :)
yeah, bit small really although they didn't look bad on Eric's E30 really.
banding them isn't a problem anyway, its just finding a few sets of the wheels is the tricky bit :)
And you'll do mine when i get some nice 15/16's? :kiss:
DaveM-sport
13-09-11, 08:39
Haha, get an extra set of them for me and I'm sure something could be arranged ;)
What Size ET you looking for? 16's in 4x100 and et 45?
DaveM-sport
13-09-11, 09:12
Should be fine depending on what width they are with that ET.
Will be making 8s and maybe 9s so ET45 should work perfectly if they are around 6.5J to start with.
Should be fine depending on what width they are with that ET.
Well suggest a better ET before i look for some :p Was just thinking if ET is 35-45 then starting @ 45 would give the most room to band? (i'm talking about steels for you BTW)
DaveM-sport
13-09-11, 09:21
Cool, I'll do my sums there and see what will work best :p
DaveM-sport
13-09-11, 09:47
Just working it out there.
Some 6.5s with ET35 will work best for making 8s-9s so some 15s or 16s in 4.100 and ~57.1 center bore would be perfect.
ET45s will do too if I go mad and go making 10-10.5s but I'll probably have problems trying to clear the coilovers and chassis legs when lowered or on full lock without extra spacers and silly amount of arch work on the front. :D
Let me know about whatever you find anyway and can choose then.
Thats for fitting my car that usually would take a 7-8J wheel with an ET of around 15-25.
If people are wondering what they can uss, I can work out what sizes other people would suit best if they tell me what size wheels normally fit the car or wheels and/or spacers they use to clear coilovers etc.
Excellent :cool:
I'll have a look around.
The 4x100's are not there in 6.5j et35. We'll be going 5.5j..... this alright with you?
DaveM-sport
14-09-11, 10:39
Will do the finest. That'll mean a zero offset 8J wheel with a 2-3" dish and good clearance to the suspension and chassis legs :cool:
Awesome, These'll be easy to find, any vw steel wheel............. I've a thread up on vag divers.
DaveM-sport
14-09-11, 14:40
Cool, I'll keep an eye on that thread so :)
What's the center bore of them out of interest?
Cool, I'll keep an eye on that thread so :)
What's the center bore of them out of interest?
Vw's are 57.1 center bore. YOU'D THINK YOU'D KNOW :p:p:p:p:p:p:p
You seem to know alot, was just suprised you had me looking for a non existant width 15" steel, but then you pointed out the crossed wires / poor english :o
What sort of money would he charge to do a set of g60's for me? 7.5 and 9
This is over in the vag-divers thread. Wasn't sure if to "out" you or not
DaveM-sport
15-09-11, 13:58
Cool, say 340 including power-coat in any colour.
That should cover any size upto sixteeen in any width.
Cool, say 340 including power-coat in any colour.
That should cover any size upto sixteeen in any width.
Sur eif your game post it yourself. Just wasn't sure if to say its DaveM-sport cause your heads gonna be wrecked for putting it up on VW site. Wasn't sure if you'd appreciate it :kiss:
DaveM-sport
19-09-11, 10:39
Hows the search coming along Keith? :D
Picking up a winter hack this evening that has some Burger King Alpina reps on it that need to be removed asap! :p
Haven't had a chance to get out lookin, was in dublin and back 3 times last week.
DaveM-sport
19-09-11, 11:52
that's no hassle. Just thought I'd ask ya to see how things are going.
Lots of 15s for this one though, will worry about 16s at a later stage for my other cars :)
well just askin what steel wheel and size ect could be done for a 200sx thanks
dermot-r32
20-09-11, 22:44
lads i must be fairly thick now because iam still struggling to understand.....i want to know how much it is to get 2 made 16x9.5 and two 16x8.5...can anyone tell me how much they will cost me?? please:( ha
DaveM-sport
20-09-11, 22:53
about 350 to do a set of steel wheels for you to any width.
dermot-r32
21-09-11, 06:26
about 350 to do a set of steel wheels for you to any width.
cheers man.and how long would it take from start to finish?
only seeing this thread now i have a set of steel rims sitting here waiting to be banded.i was actually looking for someone to do them
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.