PDA

View Full Version : My 200SX Build!



Sapporo
17-07-11, 16:21
Hey all i got this 200sx s13 92" from Sweden that was 100% original from the beginning thats quite hard to come bye=).This is my car from start to finish "type" well enjoy.

Info:
DOHC 16V 1.8L CA18DET Single Turbo
Displacement 1809cc
Max Power (169 hp) 6400 rpm
Max Torque 225 Nm 5200 rpm
5 Speed MT
2,5 Cat-back
Heatisolated Downpipe
Grinded crankshaft Bigger bearings
TRUST / GREDDY Type RZ blow off valve
HKS Super Mega Flow "reloaded"
HKS 3" Frontpipe/Decatt
Thermostatic Oilcooler "28Row "Teflonhoses"
Sachs / Aftermarket Clutch
Bigger AFM
Skyline Spreaders 440cc
Tuned ECU Stage II

Chassi:
MacPherson Front Strut
Solid Axle
Limited Slip Differential
Cusco-Sport ZERO-3 Coilovers "Pillowball Upper Mount"

Tires, Rims and Brakes:
215/45/17 Superspeed Rims
Duro Performa HR1 Tires

Interior:
*Elektronic*
HKS Turbotimer Type/0



*Interior*
Nismo Seat Belt Lock Cover "Leather"
Räzo Race Pedals
Nismo Metal Sticker
Nismo S-Tune 5MT Leather Shift Knob

Exterior:
Tinted Windows
Soshinoya Wakataba Leafs
Rear wiper and motor removed
Clear Projector Headlight
Bi Xenon 4200K
Xenon LED
Carbon Pillars

Car Audio:

JVC KD-G731 Pioneer CDX-M40 2* Pioneer 20Gb
Ground Zero 6.9Front speakers

Futureplans for me:
D-Max roofwing
Headlight Carbon Air Duckt
Yashio Gear Boot
Xenon 8000K
Carbon Innerdoor
Carbon Interior

Engine renovate did change bearings and grinded the crankshaft:
http://desmond.imageshack.us/Himg801/scaled.php?server=801&filename=dsc03278d.jpg&res=medium

placement of my overzized oilcooler
http://desmond.imageshack.us/Himg185/scaled.php?server=185&filename=dsc03297.jpg&res=mediumhttp://desmond.imageshack.us/Himg717/scaled.php?server=717&filename=dsc03257cq.jpg&res=medium
Mr big cooler


http://desmond.imageshack.us/Himg832/scaled.php?server=832&filename=dsc03267t.jpg&res=medium

Placement brackets for oilcooler http://desmond.imageshack.us/Himg826/scaled.php?server=826&filename=dsc03296h.jpg&res=medium

Reasembling the enginge now whit electric fan biggest i found :Phttp://desmond.imageshack.us/Himg707/scaled.php?server=707&filename=dsc03344td.jpg&res=medium

Soon its alive...http://desmond.imageshack.us/Himg90/scaled.php?server=90&filename=dsc03336qm.jpg&res=medium

Its alive!http://desmond.imageshack.us/Himg822/scaled.php?server=822&filename=dsc03347.jpg&res=medium

Sapporo
17-07-11, 16:24
Got my front/downpipe but it did not fit as i expected you se the gap? :P im now only driving whit the frontpipe and original down...
http://desmond.imageshack.us/Himg860/scaled.php?server=860&filename=dscn2066.jpg&res=mediumhttp://desmond.imageshack.us/Himg857/scaled.php?server=857&filename=dscn2067.jpg&res=medium

Sapporo
17-07-11, 16:28
getting my Xenon kit installed 4200K whit crystal headlight going to change later to 8000k :D
http://desmond.imageshack.us/Himg25/scaled.php?server=25&filename=dscn1648qn.jpg&res=mediumhttp://desmond.imageshack.us/Himg833/scaled.php?server=833&filename=dscn1642t.jpg&res=medium

The crystal headlights from ebay they totaly crap btw..http://desmond.imageshack.us/Himg171/scaled.php?server=171&filename=dscn1650z.jpg&res=medium

Sapporo
17-07-11, 16:31
Did buy some new frims as well now the car looks alot better unstead of the ugly original crap :D
http://desmond.imageshack.us/Himg708/scaled.php?server=708&filename=dscn3852.jpg&res=mediumhttp://desmond.imageshack.us/Himg801/scaled.php?server=801&filename=dscn3961v.jpg&res=mediumhttp://desmond.imageshack.us/Himg846/scaled.php?server=846&filename=dscn3854w.jpg&res=medium

Sapporo
17-07-11, 16:34
http://desmond.imageshack.us/Himg8/scaled.php?server=8&filename=dscn3999r.jpg&res=mediumhttp://desmond.imageshack.us/Himg580/scaled.php?server=580&filename=dscn3911d.jpg&res=medium

Got even these bad boys now :D felt like a little child in christmashttp://desmond.imageshack.us/Himg42/scaled.php?server=42&filename=dscn4136zq.jpg&res=mediumhttp://desmond.imageshack.us/Himg263/scaled.php?server=263&filename=dscn4133k.jpg&res=medium

Sapporo
17-07-11, 16:35
Mounted at last after much profanity..
http://desmond.imageshack.us/Himg823/scaled.php?server=823&filename=dscn4157t.jpg&res=mediumhttp://desmond.imageshack.us/Himg200/scaled.php?server=200&filename=dscn4143c.jpg&res=mediumhttp://desmond.imageshack.us/Himg706/scaled.php?server=706&filename=dscn4160b.jpg&res=mediumhttp://desmond.imageshack.us/Himg192/scaled.php?server=192&filename=dscn4155f.jpg&res=medium

Sapporo
17-07-11, 16:36
http://desmond.imageshack.us/Himg585/scaled.php?server=585&filename=dscn4151.jpg&res=medium

Sapporo
17-07-11, 16:51
Got the coils mounted now need to make it higher like 3cm back 2cm front so i can drive almost anywhere :D

http://www1.garaget.org/archive/48/47400/186009/186009-2420279.jpghttp://www1.garaget.org/archive/48/47400/186009/large_186009-2420285.jpg

Sapporo
17-07-11, 16:55
Oops almost forgot need some interior shots!

http://www1.garaget.org/archive/48/47400/186009/large_186009-2292285.jpghttp://img101.imageshack.us/img101/3112/dscn4066y.jpghttp://img683.imageshack.us/img683/6844/dscn4107f.jpg

Dori88
17-07-11, 16:58
love how clean that is

great work man

S14a johno
17-07-11, 17:39
that one clean car mate, fair play toya :afro::afro::afro:

why wouldnt the decat match up???

si_berry
17-07-11, 17:42
Best of luck with man, whena the SR going in?

Sapporo
17-07-11, 21:16
no the decat did match i did just take a quick photo of it... si_berry i have no idea maybe later if i even keep the car =)

Sapporo
18-07-11, 15:50
got finaly my car back from rust repair it did take quicker then i taught...and the job is fantastic now i dont have to think bout it any longer =)

http://desmond.imageshack.us/Himg20/scaled.php?server=20&filename=dscn4218t.jpg&res=mediumhttp://desmond.imageshack.us/Himg88/scaled.php?server=88&filename=dscn4217y.jpg&res=mediumhttp://desmond.imageshack.us/Himg843/scaled.php?server=843&filename=dscn4219.jpg&res=medium

Sapporo
20-07-11, 15:47
spraying on the new paint..

k1nick
23-07-11, 11:09
carbon door panels and interior in future works.thats nice but think that wing mount intercooler is very restrictive. any upgrade planned?

Sapporo
22-09-11, 22:22
no not in a long while cause i crashed in a moose im alright but shaken up.the car has a nasty damage hope the insurance company will repair it for me. :(

decobyrne106
22-09-11, 22:53
shit out of luck man! looks so clean in the pics for a 200sx! much chassis damage?

Sapporo
23-09-11, 20:17
the car right now:(

http://desmond.imageshack.us/Himg641/scaled.php?server=641&filename=dscn5008m.jpg&res=medium

http://desmond.imageshack.us/Himg571/scaled.php?server=571&filename=dscn5007d.jpg&res=medium


http://desmond.imageshack.us/Himg847/scaled.php?server=847&filename=dscn5006b.jpg&res=medium


http://desmond.imageshack.us/Himg98/scaled.php?server=98&filename=dscn5005b.jpg&res=medium
http://desmond.imageshack.us/Himg97/scaled.php?server=97&filename=dscn5004v.jpg&res=medium

pepsterx
23-09-11, 20:35
Holly shit man!!! I did the same but donkey instead ofn a moose :)

keith_b
23-09-11, 20:35
Shit man thats nasty. Hope insurance sorts it out for ya

Sapporo
23-09-11, 22:44
yes Keith i hope it too.aha pepsterx a donkey hehe hope you got not hurt.