Streeto R32

[slithertooth]

Got this today, gonna drive it for the rest of the summer, plan is change wheels , some spacers and a lower driver seat:)

http://i738.photobucket.com/albums/xx24/poolybag/r32001.jpg
http://i738.photobucket.com/albums/xx24/poolybag/r32005.jpg
http://i738.photobucket.com/albums/xx24/poolybag/r32002.jpg

[japstuff 2]

Looks well mate enjoy

[pole drift]

Nice one :) what wheels are on it?? Sssphec??

[slithertooth]

Ultralite A-tech 17x8j. Feck all spec , didn't have time to look proper after bringing it back , needs a turbo. won't be looking for much more than stock power

[180sxbreaker]

nice one rory enjoy it..i always loved 32's but petko raped my last one:p

it looks well lad best of luck wit it

[mick-skyline]

there battles ;) atec's are 6 spoke :p

alot of 32's poppin up these days. looks well

[Stevo]

Really liking 32's lately best of luck with her

[Random Rs]

gorgeous 32 only got one myself the other day, well ware :)

what front bumper is that?

[mick-skyline]

the same as the one i have there for ya ;)

[slithertooth]

Thanks for the comments lads, anyone got ideas for wheels the ultralites do nothing for me, only ever had 16's on a r32 do 18's work on them

[sponsor-a-panda]

nice motor man, seen it up a while back was going fierce cheap if all it needed was a turbo! and yes 18s do work i have 18s on mine

[stevokr32]

nice motor rory going back to your roots,a nice set of rotas or volks would be nice.:)

[pepsterx]

Nice little car that, if you do put the 16's on you'll look like a big puff :p
Try the LM's on it budd

[serious tom]

Fair play, looks to be nice and clean!
Just enjoy it!

[jonnyrb]

nice car lad... realy gettin ta like the black r32's... meisters meisters meisters!!!

[batman026]

sweet car man, i want a 32 very very soon, i love the sound off the RB

[slithertooth]

nice motor man, seen it up a while back was going fierce cheap if all it needed was a turbo! and yes 18s do work i have 18s on mine
Forgot about your GTR's :), what seats did you put in yours after binning the panda leather

nice motor rory going back to your roots,a nice set of rotas or volks would be nice.:)
Just couldn't pass up the black, only realising now how clean that black one i brought in was, this one is ok but nothing in comparison

Nice little car that, if you do put the 16's on you'll look like a big puff :p
Try the LM's on it budd
Puff Daddy!!! where them hedge pic's

Fair play, looks to be nice and clean!
Just enjoy it!
Cheers tom

nice car lad... realy gettin ta like the black r32's... meisters meisters meisters!!!
Got something for ye:)

sweet car man, i want a 32 very very soon, i love the sound off the RB
Thanks lad, even better with an external waste gate:):)

So tried the new shoes on but need bloody slimline nuts:mad:
Spacers didn't work out either,
sneak preview of the boots
http://i738.photobucket.com/albums/xx24/poolybag/r32.jpg

[Tomas_s13]

finaly liner!!!! if you still need them skinny bolts by monday give me a shout- will get you a set

[Dori_Rory]

Seen this in person yesterday, tidy lookin lump of a car! Best of luck with it Rory.

.....
.....
Rory :o

[slithertooth]

Cheers Tom and Roey, update time , addressed the interior firstly by swapping front seats to R33 series 2 ones and fitted a deep dish steering wheel , makes driving position much better but i'll keep on the lookout for s15/r34 seats for it
http://i738.photobucket.com/albums/xx24/poolybag/r32007.jpg

next up was to figure out what immediate stuff needed doing, steering rack is shot and turbo is blowing to a point of no boost, so engines coming out for a tidy up (nothing internal- yet.....) and hicas is getting binned.
Few bits to be done this week
RB25 turbo and elbow
ex mani studs replaced
engine leaks sorted
timing belt/service
a/c removal
replace steering rack wth R33 one
R33 LCA's
S13 rear subframe + solid bushes
Shim diff

Engine shot pre removal:)
http://i738.photobucket.com/albums/xx24/poolybag/r32006.jpg

[Micko]

Sweet car Rory, body looks mint.

Pretty sure its lynskeys old r32 from Navan, he used to work in Trevor Mconnells, minded it like a baby best of luck with her.

[JDM Junior]

Nice car lad! Best of luck with it :)

[D-turbo-lad]

ahhh looks well with the lms on it bud :) wish i got a look at it the other nite see if was the same when i seen it last :) only round to geting the skyline back togeather to day :rolleyes:

[slithertooth]

Sweet car Rory, body looks mint.

Pretty sure its lynskeys old r32 from Navan, he used to work in Trevor Mconnells, minded it like a baby best of luck with her.

Thats the one indeed , have a picture of it outside the church in dunboyne the day of my wedding, couldn't help going for it it's a pretty good base so hopefully i can make a good road car out of it

Thanks for all the comments lads , hopefully stuck into it this week

[slithertooth]

Bit of an update, so rear subframe got binned for a s13 one and in went solid bushes, and a couple poly bushes replaced the hicas joints.

http://i738.photobucket.com/albums/xx24/poolybag/r32013.jpg

Front rack was removed and replaced with r33 rack, p/s pump and crank pulley, also put in lca's out of r33 that were strenghtened and had a bit of bump stop work done

http://i738.photobucket.com/albums/xx24/poolybag/r32012.jpg

Engine got a clean up mainly new exhaust studs, gaskets, turbo gaskets, RB25 turbo / compressor elbow / turbo elbow

Inside got a dishy steering wheel and a Trust knobby

All fluids were changed and new rubber fitted to a set of rattle canned s14
wheels, running great now and every roundabout is an adventure

http://i738.photobucket.com/albums/xx24/poolybag/r32015.jpg

http://i738.photobucket.com/albums/xx24/poolybag/r32014-1.jpg

[pole drift]

Looking good, glad to see the subframe went to good use

[Brady]

mint bus man good work gone into it

[Robbie Daly Ps13]

Looking good Rory but needs a set of wheels badly...! She'd be mint on a nice set of rims...!

[slithertooth]

Looking good Rory but needs a set of wheels badly...! She'd be mint on a nice set of rims...!

Cheers lad , still have the nismo lm's there for it, need them skinny nuts for them , ebay may be hit tonight. Wanted to keep them for the 4 door but if they sit nice on it they'll go on it

[dil]

looking good man, sounding very similar to my 32 now :D (alans old one!)!!

[Greg]

What are the solid subframe bushes like on a road car? Is there much noise or vibration?

[slithertooth]

What are the solid subframe bushes like on a road car? Is there much noise or vibration?

Yeah there's a bit of both,and the paddle clutch doesn't help take offs. but i suppose its like living with a welder on the road you get used to it.

[Greg]

Yeah there's a bit of both,and the paddle clutch doesn't help take offs. but i suppose its like living with a welder on the road you get used to it.
But the pay off with no movement or bangs from the subframe while dricing is worth it? I'm pretty used to vibrations and jerkiness taking off anyway.

[slithertooth]

But the pay off with no movement or bangs from the subframe while dricing is worth it? I'm pretty used to vibrations and jerkiness taking off anyway.

The difference is mega, comparing to the old set up with hicas it's the first thing to be done, car could do with adj front castor . rear toe and camber arms and a visit to wez but will do fine for the time being

[Greg]

The difference is mega, comparing to the old set up with hicas it's the first thing to be done, car could do with double dutch
Cool, cool. Must get some for my car so. The second part of that means nothing to me. Mainly because I don't understand suspension set up. lol :D

[Tomas_s13]

somebody please by my merc 190E, that i could get this meanmachine ofrorys hands :cool:

[pole drift]

somebody please by my merc 190E, that i could get this meanmachine ofrorys hands :cool:

Hopefully he'll keep this for a while :) I'm gonna b breaking that 200sx at the weekend, ill get ur parts back 2 ya