new ps13 build

[180sxbreaker]

bought this ps13 off hachihead on here...needs some tlc but it will get there.. it going to be a road car that will see a bit of track and drift days all goin well
it has slight drivers quarter damage but nothing major
so less the chat here is a small bit of spec that on it Updated..9-4-12

Red top sr20det
Cusco paddle clutch
4 branch heat wrapped Apexi manifold
Hks gt2860r turbo
3 Braided turbo lines including the water pipe from back of head
Hks adjustable actuator
Hpi turbo elbow
Japspeed 3" downpipe wit flexi
Hpi cat back exhaust
East bear driver seat
Kouki s14 passenger seat
Cusco front strut brace
Cusco fat type rear strut braces
30mm rear quarters
25mm vented wings
Origin side skirts
Origin agressive type 1 front bumper with clear bumper lights
Origin agressive type 1 rear bumper
2 bar grill
Apexi power fc with hand commander and Apexi boost solonoid
Gtr fuel pump
Z32 air flow meter
Greddy hard pipe for z32
Trust air filter
Tomei 740cc injectors
Hpi Fmic with all the pipework incl one piece drivers side pipe
Tein extra lock tie & track rods with rack spacers
Modified front hubs for extra lock
Steel steering rack bushing
Tein pillow ball adjustable tension rods
Jic Magic front coilovers
Jic magic rear coilovers
Razo gear knob
Fly off handbrake
Aero catch bonnet latch's
Grooved front brake discs
B&M short shifter
Hks turbo timer
Cusco Dash dodger cage with first day padding
Cusco oil catch can
Adj fuel pressure regulator
2 Way diff with 4:1 ratio
Battery relocated to boot in fibreglass battery box
Front tow eye
Billion variable fan controller
Greddy 60mm boost gauge
Greddy 60mm oil pressure gauge
Greddy 60mm oil temp gauge
Greddy 60mm water temp gauge
Greddy 60mm exhaust temp gauge
Greddy 60mm fuel pressure gauge
Greddy 60mm air flow meter gauge
Deep dish steering wheel and boss kit
Broadway rear view mirror

car had full cage but its now removed and clean interior put back in
pic of it when shane "hachihead" had it before he started to break it
http://i32.photobucket.com/albums/d49/hachihead/Silvia/13062008023-001.jpg
THE CAR AS I GOT IT
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1246_1.jpg?t=1310663784
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1251_1.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1249_1.jpg
THE ROLL CAGE THAT I TOOK OUT OF IT
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1296.jpg
http://i980.photobucket.co/albums/ae284/180sxbreaker/IMG_1299.jpg
THE SIDESKIRTS
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1247_1.jpg
THE TURBO AND 4 BRANCH JUST OFFERED UP TO IT
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1302.jpg
thats the front bumper offered up to the car and offered up fair bad:cool:
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1340.jpg?t=1310667737
with no carpet
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1322.jpg
with carpet
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1323.jpg
with new dash and carpet cut neat for hydro bracket
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1328.jpg
new door cards
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1342.jpg

[slithertooth]

Nice , love track cars been put back on the road, is it gonna stay stickered up

[garyae86]

yup get them pictures up what you doing with the skirts on it ????

[nikkisixx69]

always loved that car! good job dude!

[tomsheen]

haha sweet i was wondering if he sold it or not.. tis a fine bus did my first ever drift
in this thing.. all it needs is tlc as said.. well ware lad best of luck with it :cool:

[Hachihead]

Will be sweet to see it put back together.:D

[180sxbreaker]

Thanks for the replys lads few pics up now of it

[180sxbreaker]

Nice , love track cars been put back on the road, is it gonna stay stickered up

no rory the stickers are off it only the prodrift 121 sticker is stuck on inside of boot door for keeps sake

[serious tom]

happy days man! best of luck building it back up!
I have a set of those skirts in the OP, may have several more soon.

[Mac_C]

All the ingredients for a bad ass road car ! :cool:

Best of luck with her Martin ! Will be keepn eye on your progress :)

[Jerry C]

she's in the want of some tlc but no better man to piece it back together. Best of luck with it martin.

[180sxbreaker]

she's in the want of some tlc but no better man to piece it back together. Best of luck with it martin.

cheers jerry the new wings arrived today i will hav the pics up soon of them start of next week should see the 50mm quarters fitted

progress won't be the fastest but it will get there, bought engine dampner off dil today,top bloke to deal with too

still not sure what colour to go i may just keep it simple white
any views anyone??

[ian g sr20]

no dout youl make it to be a savage looking car, with all them nissans you be breaking ha. best of luck with it.

[180sxbreaker]

no dout youl make it to be a savage looking car, with all them nissans you be breaking ha. best of luck with it.

off topic anthony did that steering column last night do the job??

[ian g sr20]

off topic anthony did that steering column last night do the job??

it did sound, steering is very heavy since i fitted the coloum mite be of lack of use and lyin around it will do me to get to mondello and back down ill look into it when iget back ha

[180sxbreaker]

update pics of the 40mm vented wings..note these are only laid up against the car

http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1347.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1348.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1346.jpg?t=1310761121

cheers to lorcan @ drift2motorsport for fast delivery too

[C-Rex]

Looking well Martin Have you got the rear arches/fenders too?

Must drop you over them coilpacks they are notmy problem anyway:confused:

[180sxbreaker]

Looking well Martin Have you got the rear arches/fenders too?

Must drop you over them coilpacks they are notmy problem anyway:confused:

ya i hav 50mm quarters for the back aswell i fitting them next week..and no prob with the coilpcks packs paul wenever your free no panic

[180sxbreaker]

quick update got the rear seats fitted and also got the hks turbo fitted.should be goin for paint in next few weeks..big updates then

[Hachihead]

any updates lad?

[Magic21]

good build mate. Are they the origin front wings?

[180sxbreaker]

@ hachihead ya few updates nothing serious tho.. i was goin to break the lot but decided to stick wit it and finish it out

whilst i was goin to break it i had only sold few small pieces like bride seat and hydro and engine dampner all bits that can be got again

i swapped the 40mm vented wings for 25's as my quarters are 30's not 50's...and finally collected my rear bumper that i paid for 7 weeks ago:D

new wheels on the way too

i fitted fmic too quarters being fitted tommorow and car being dropped for paint on saturday..so the next update should be interesting:rolleyes:

[Mac_C]

Thats the attitude lad , glad to hear youre going to stick at her :cool:

[180sxbreaker]

Thats the attitude lad , glad to hear youre going to stick at her :cool:

ah i might as well i lookin forward to gettin it back from body shop

[Mac_C]

Will be worth it in the end ted ! makes a change for ya too building instead of breaking lol :)

Looking forward to seeing the pics :cool:

[180sxbreaker]

Will be worth it in the end ted ! makes a change for ya too building instead of breaking lol :)

Looking forward to seeing the pics :cool:

i'll drop ya a bell wen i collect it..did ya make any start on that 180 yet?

[Mac_C]

Sound :cool:

I didnt man , waiting till have everything their for her till i start :)

[doug]

what wheels you get martin??

[batman026]

good to see you sticking at it martin, looking forward to seeing the finished product

[200sx-slider]

about time u stuck with a build

[180sxbreaker]

tis about time i got myself back sliding bein nearly a year since i've had a right yoke

[s13/180sx]

looks well lad, :)

[batman026]

tis about time i got myself back sliding bein nearly a year since i've had a right yoke

a year???? you must have some will power :p

[180sxbreaker]

a year???? you must have some will power :p

movin house settin up a garage here at new place and a baby in the middle of all that...that sums up the time and lack of funds;)...

[batman026]

movin house settin up a garage here at new place and a baby in the middle of all that...that sums up the time and lack of funds;)...

i know how half that feels anyway martin :D best of luck with the rest of the build lad

[180sxbreaker]

i know how half that feels anyway martin :D best of luck with the rest of the build lad

cheers richie.. i just need to pull the finger out now today:rolleyes:

[180sxbreaker]

http://i980.photobucket.com/albums/ae284/180sxbreaker/ps13fmicinshed.jpg?t=1316263591
http://i980.photobucket.com/albums/ae284/180sxbreaker/ps13inshed.jpg?t=1316263260
http://i980.photobucket.com/albums/ae284/180sxbreaker/ps13inshed3.jpg?t=1316263649


just a few pics to show ye wat i've been at...the fmic is fitted and 2 pics of how the kit should look wen on...tis only mocked up against it there but everything will be good fit as its all genuine origin
first pic of car shows the new wings they are 25mm the second pic has the 40mm wings on it... both these wings came from drift2motorsport and are good quality wings

[180sxbreaker]

wat i've been at over last day or 2...had old type bonnet pin holes and i had aero catch locks here so i decided to go mad wit a mini grinder:)..
http://i980.photobucket.com/albums/ae284/180sxbreaker/bonnetpin5.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/bonnetpins4.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/bonnetpins.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/bonnetpins2.jpg

i also fitted my tein extra lock tie rods and track rods and rack spacers,..not major lock but tis only a road car and i just done few other bits and bobs like fitting brakes and tightened everything
http://i980.photobucket.com/albums/ae284/180sxbreaker/extralock.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/extralock2.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/extralock3.jpg?t=1316724352

so gettin there now..another few bits before the car goes for paint.
should hav more pics and updates soon

[paddy 180]

Fair play martin. Stick with this one and dont break it:D. Best of luck with her. Sent you a pm there.

[david89]

good man martin, its lookin well now.. wat colour is it going??

[batman026]

she looks well now martin, you should throw a set of S14 lower control arms on the front, they will give you that bit extra lock and a nice bit of camber up front ;)

[pole drift]

Good work Martin, looking forward to see'n it soon.

[Mac_C]

Taking shape lad ! Nice work :cool:

[180sxbreaker]

cheers lads i'll hav more updates too soon..and cheers richie they're on my list

[Boguey001]

Cant wait to see this Martin, its going to be class.:)

[180sxbreaker]

cheers james,, it'll be no time soon before it all finished

[jamieae111]

nice build :)

[180sxbreaker]

bit of a fast update for ye..car goin for a lick of paint on tuesday so just doin finishing touches between here and then
new items to add to list
Cusco front and rear strut braces
hpi turbo elbow
hpi cat back exhaust
17 row oil cooler and relocater kit
recaro drivers seat wit recaro rail
few pics of sum of the bits nothin major
as ye will see from pics i removed some of slam panel to fit oil cooler behind the grill and above fmic,, i was hoping to put it to left of intercooler but the one piece pipe work would not allow me enough room
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1421.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/exhaustcatback.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/filterandelbow.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/bumperandstrutbraces.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1424.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1425.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1426.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1442.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1443.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1449.jpg

[200sx-slider]

in the pic with the exaust are they 180sx vented wings the black ones

[180sxbreaker]

in the pic with the exaust are they 180sx vented wings the black ones

ya but they are sold tho

[180sxbreaker]

spec in first post updated and update on car.... it is officially gone to the body shop for her new lick of paint..
can't wait to get this back;)

[pepsterx]

Come on you big gay is this still not finished ????:p:p:p:p:p:p:p

[nikkisixx69]

nice! what color you going dude??

[180sxbreaker]

nice! what color you going dude??

i'll say nothin till ye see pics nothin mad tho but the few things i want to do should make it nice hopefully anyhow:rolleyes:

@petko..i forget wat u look like so long since i seen ya:)..u sound like pitbull so ya must look like him :cool:
it ain't fineshed cause we ain't all loaded like u it gettin there tho new rims on the way too to fill them quarters

[marksull]

looking well lad, nice build. what wheels u go for?

[180sxbreaker]

looking well lad, nice build. what wheels u go for?

@ mark...not sure yet i've had my eye on 2 or 3 sets but still not sure yet

UPDATE:
new 50/50 lights bought today for the ps and battery box arrived too..few wheels in stock to line up to car but hard to choose

should hav pics from bodyshop work during the week

[batman026]

where did you get the light in the end martin?

[180sxbreaker]

lorcan @ drift2motorsport was cheapest for them

[180sxbreaker]

Work has started on the car so i getting excited now

got a few more parts to add to spec list

Cusco dash dodger cage with proper padding
Cusco oil catch can
Adjustable fuel pressure regulator

will hav more pics and updates soon

[ian g sr20]

Bring on the pics lad. Can't wait to c it. Nice bit of work u put into it.

P.s have u any 3 inch down pipe for me

[180sxbreaker]

Bring on the pics lad. Can't wait to c it. Nice bit of work u put into it.

P.s have u any 3 inch down pipe for me

cheers anto pics will be soon, my camera wanked..i don't but pm 200sx slider i think he has one

[Boguey001]

This is going to be sweet when its finished, very nice spec on it. :) We need more pictures though. :D

[180sxbreaker]

due to lack of camera no pics for ya sorry

new updates for ye some more spec

Z32 air flow meter

Apexi power fc with hand commander and Apexi boost solonoid valve (that allows me to change the boost from the hand commander)

2 way diff make unknown 4:1 ratio

[batman026]

some nice parts there martin, how much did you pay for the power fc?

[Maloney]

nice build man, will be some bus when its fully finished!

[180sxbreaker]

^^ cheers lads

hopefully it will be wen finished but still so so much to do to it

[s13/180sx]

its taking shape man, did you decide on any wheels yet?

[180sxbreaker]

still not decided wat wheels yet timmy..waitin till car painted to see how they look then

[subzero]

this should wreck your head a little more :)

http://i6.photobucket.com/albums/y204/subzero182/various/s13_vskf_bkb_800.jpg

[180sxbreaker]

as if my head wasn't wrecked enough johhny.........i've takin on a new project too and i've not even got this finished... :)

[180sxbreaker]

righto,,excuse the quality of pics as they from shit phone

just a few pics of parts that i got and pics showing the lads lining up the bits.. nothing in the pics are permanently fitted so don't worry about the original quarters or exhaust hittin bumper all them bits will be sorted

original quarters are now cut but no pics of them yet, and second pic shows the lads removed every pin dent that was on the car, there was quite a few all over that i had not coped but the lads have a good eye for that stuff

http://i980.photobucket.com/albums/ae284/180sxbreaker/cardermots.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/cardermots4.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/cardermots3.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/cardermots2.jpg

pics of the parts picked up in last few days, no pic of cage fitted as phone only takes shit pics as too much light in the backround

http://i980.photobucket.com/albums/ae284/180sxbreaker/apexipowerfc.jpg
http://i980.photobucket.com/albums/ae284/180sxbreaker/rollcage.jpg

more pics and of better quality to come over next few days

[doug]

shel make a fine "henhouse" haha
from what you wer telling me id say its going to be a right tidy paint job! cant wait to see it

[ian g sr20]

looking good waith ya lad cant wait to see it finished

[180sxbreaker]

@ doug..................total henhouse shur;)

@ian g... i can't wait to get it back..it comin on well now tho so i happy out

[180sxbreaker]

1 or 2 better quality pics, i've not being there in day or 2 so should hav few more pics come thurs or friday

http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_0036.jpg?t=1320241210
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_0037.jpg?t=1320241140
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_0038.jpg

[D-turbo-lad]

http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_0036.jpg?t=1320241210


^^^ i like ur big pipe martin ;)

so when u sellin it :D

lookin fair well now :)

[180sxbreaker]

can't wait to see kit properly on and a spot of colour on it all even if twas only primer
i not in panic with it back and i told the lads that..(prob the worse thing to tell a panel beater,, is to take his time) ha ha

but with sandy claws around the fuckin corner this won't see finishing till 2012:cool:

[180sxbreaker]

pic of my original arch.. cut welded and all sealed

http://i980.photobucket.com/albums/ae284/180sxbreaker/032-1.jpg?t=1320534351

[sil8094]

nice build . love ps13s :D

[Mac_C]

Very tidy done !

Gona be sweet as fuck when done man , which wont be long with th erate your going threw it !

So much ya want for the wheels and PFC an comander :p

[180sxbreaker]

latest aditions
D-max carbon fibre mirrors,, but due to scratches these will be sprayed
http://i980.photobucket.com/albums/ae284/180sxbreaker/dmaxmirrors.jpg?t=1321129116
full bucket seat, this will mean the recaro recliner will go to passenger side
http://i980.photobucket.com/albums/ae284/180sxbreaker/010-9.jpg

[180sxbreaker]

Bit of a update for ye..
Tein pillow ball adjustable tension rods and yellow top injectors
http://i980.photobucket.com/albums/ae284/180sxbreaker/008-9.jpg?t=1321573234
http://i980.photobucket.com/albums/ae284/180sxbreaker/009-10.jpg?t=1321573317
http://i980.photobucket.com/albums/ae284/180sxbreaker/010-11.jpg?t=1321573403

[Darenm]

looking good martin dont spray them mirrors a lil scratch wont hurt :P shaping up nicaly doh cant wait to see it sprayed

[180sxbreaker]

looking good martin dont spray them mirrors a lil scratch wont hurt :P shaping up nicaly doh cant wait to see it sprayed

i too fussy i'd hav to spray mirrors darren, i cant wait to get the car back myself it almost there tho.........Almost:wink:

[180sxbreaker]

pics from today..adj teinson rods fitted and pic of lock..not bad for road car i think


http://i980.photobucket.com/albums/ae284/180sxbreaker/008-10.jpg?t=1321642745
http://i980.photobucket.com/albums/ae284/180sxbreaker/010-12.jpg?t=1321642941

[doug]

comin along martin! dont get too attached to that seat,:wink:

[nikkisixx69]

coming along nicely dude! i spy some tasty wheels in the background also! :cool:

[180sxbreaker]

@ doug we'll see tomorrow :D

@ nikki699999999.. ya dont miss much:rolleyes:. they on trial

[180sxbreaker]

another small update picked these up tonight,,, a set of adjustable toe arms for rear
the chroming wasnt great but rose joints are perfect on them
http://i980.photobucket.com/albums/ae284/180sxbreaker/015-6.jpg?t=1321921037

[180sxbreaker]

I wish I had a update for here .. Hopefully I will do soon

[pole drift]

Reading this makes me wish i still had my PS :(

[180sxbreaker]

news!!!!!!!!!!

car finally in primer,

should hav pics soooonnn..i like a child cant wait to get it back

[Mac_C]

LOL nice 1 ! Say your down every day "is it ready yeat is it ready yeat...." :p

[180sxbreaker]

LOL nice 1 ! Say your down every day "is it ready yeat is it ready yeat...." :p

oh i keepin very close eye on it

[Mac_C]

Haha , when we gona see these pics you speak of ? :p

[180sxbreaker]

Haha , when we gona see these pics you speak of ? :p

wen he opens the doors i'll be down haha hopefully tomorrow :cool:

[Mac_C]

Looking forward to seeing it with a lick of paint , gona be a fine machine when done :cool:

[180sxbreaker]

Well as promised a pic of it as it sits this morning..it is in primer and it all sanded down
just putting bumpers and panels off car in primer wen i left the premises today

also pic of the passenger seat that i got for it as i sold the recaro
i know tis a replica but i got it with a passenger rail for good money and lets face it....i won't be sittin in it haha

http://i980.photobucket.com/albums/ae284/180sxbreaker/014-8.jpg?t=1325286421
http://i980.photobucket.com/albums/ae284/180sxbreaker/018-7.jpg?t=1325286266

[Mac_C]

Yes ! Gona be mean looking dude , them quarters and wings are looking Phat :afro:

Ya cant have long to wait now .

What colour ya say ya went for ?

[180sxbreaker]

Another pic...should hav loads more soooooooooooonnn
Also got new front break pads and handbrake cables
the list very small now :)
http://i980.photobucket.com/albums/ae284/180sxbreaker/015-7.jpg?t=1325335243

[Kruizer]

Finish her and keep her, she will be savage lad...

[180sxbreaker]

Finish her and keep her, she will be savage lad...

well i'll finish it anyhow dunno about keepin it hahaha

[180sxbreaker]

car in spray booth,,,,,,,,,,,,,,,getting excited now;)

[seanie R.33]

What colour ya goin??

[180sxbreaker]

What colour ya goin??

pics will tell ya,,,stay tuned:p

[nikkisixx69]

pics will tell ya,,,stay tuned:p

it better be red :p

[180sxbreaker]

it better be red :p

i'll put u out of your missary.......it ain't red but it nearly was haha

[nikkisixx69]

i'll put u out of your missary.......it ain't red but it nearly was haha

haha i have a thing for red ps13's! white??? im guessin white

[180sxbreaker]

Car is painted just waiting on it all to be put back together and gaps lined up etc

[doug]

tis a nice shade usualy i dont like orange yokes but the pics ya showed me it looked tidy.. ;)

[180sxbreaker]

Haha ssshh

[sheepo]

ps lookn well...put up some pics when shes finished :)

[david89]

When are ya hopin to have it back martin?? I cant wait to see the finished product:)

[180sxbreaker]

When are ya hopin to have it back martin?? I cant wait to see the finished product:)

was hoping to hav it back yesterday but demanding it back saturday coming david

[david89]

Your dead right, id say your dyin to see it painted..

[180sxbreaker]

I seen it painted I waiting to see it back together and to drive the huer

[180sxbreaker]

few more goodies:cool:
http://i980.photobucket.com/albums/ae284/180sxbreaker/013-14.jpg?t=1326571667
http://i980.photobucket.com/albums/ae284/180sxbreaker/012-15.jpg?t=1326571594
http://i980.photobucket.com/albums/ae284/180sxbreaker/010-18.jpg?t=1326571531
http://i980.photobucket.com/albums/ae284/180sxbreaker/011-13.jpg?t=1326572030

[Kruizer]

Did you get it back fella ?

[180sxbreaker]

Did you get it back fella ?

nope brendan..i fuckin raging..the car itself is painted inside and outside and bonnet bootdoor wings and quarters and skirts and tail lights are fitted
just waiting on the rest

[jeff nelson sileighty]

fuck sake martin hurry up im waitin aaaages to see this finished :mad: :p

[damo86]

Have those lights here for ya

[180sxbreaker]

Have those lights here for ya

Cheers Damo.. I surely owe u a pint or 2 at this stage

@ Jeff.. Imagine how I feel haha
Longest fuckin paint job in history

[hi_im_fil]

Lookin forward to seeing pics of this back from paint.

Epic sig by the way haha

[180sxbreaker]

Guess what i'm collecting tomorrow lads:D:D:D:D:D:D:D:D:D:D:D:D

[damo86]

your lights lol

[180sxbreaker]

your lights lol

those too haha

[s13/180sx]

looking forward to seeing this martin, uve been keeping us waiting long enuf :P

[D-turbo-lad]

not tomorrow now ..................... :D

give me a text bout that yokey if u havent got 1 ...

[haydomiata]

hurry on will ya and stop keepin us outa the dark!!! :P

[Kruizer]

Dude get a wiggle on !

[subzero]

6.5 K views on this thread and no car . wtf . get the finger out ! :D

no pressure but youve a lot to deliver , LOL

[180sxbreaker]

Oh don't worry johnny u will be getting the finger out too i will be givin u a call too so ya can come down and giv a helping hand

[Kruizer]

If ya need another set of hands dude you have my number...

[subzero]

Oh don't worry johnny u will be getting the finger out too i will be givin u a call too so ya can come down and giv a helping hand

ha ha , ill prob break more than fix ... ill at least take some tarty pics of the car next time i down ....

oh ya ill have that air con for ya as well soon. . . ya fancy prick :cool:

[180sxbreaker]

cheers brendan

and johnny ya know me i hav to keep cooooooooooool.........

[180sxbreaker]

also bought the tow hook off the front of this
http://i724.photobucket.com/albums/ww246/bart180sx/photo.jpg

[si_berry]

also bought the tow hook off the front of this
http://i724.photobucket.com/albums/ww246/bart180sx/photo.jpg

nice tow hook lad! :)

[pepsterx]

Monkey boy will this ever be finished ???:p

[C-Rex]

Get this done will ya!!! Im waiting on collecting my wheel until you get this back:D

[Romo]

well at least we know what the tow hook looks like.... cmoooooooooooooon

[180sxbreaker]

well at least we know what the tow hook looks like.... cmoooooooooooooon

must get pics up weekend

[Mayo S13]

cant wait!

[Darenm]

we need pics u lazy fecker :p

[180sxbreaker]

Still gathering bits for to do finishing touches thanks for bein patient Darren haha
I'll update spec wen I get home to laptop

[pepsterx]

Dude you probably broke the thing but you wont tell us cause we'll abuse ya ha :p

[Boguey001]

And you were telling me ta get the finger out haha. Ya may hurry up lad, these ones are starting ta lose faith. :p

[180sxbreaker]

patience james.....or i'll tell your dad your secret haha....

[D-turbo-lad]

wheres the fukn pics martin .. ... cum on u cant be holdn out that much more on us ...

[batman026]

wheres the fukn pics martin .. ... cum on u cant be holdn out that much more on us ...

X2 i wanna see it FFS :p

[Daly]

I got to see it in the flesh and all i can say is full of win!!! Really impressed with it, Best of luck with finishing her Martin :cool:

[skinnynphats200]

Pics FTW!

[Darenm]

;) ;) ;) ;) ;) ;) ;) ;)

all il say is this is full of win :cool:

will b up soon martin :)

[180sxbreaker]

Just hav few bits to get this finished I'm movin house and hav my little girls 1st birthday Sunday so busy busy and not gettin at car
It will defo be out for sat so will have pics then if Johnny comes down with his fancy camera
Cause c-Rex says I'm shit at takin pics;)

For those who seen it sound for comments:kiss:

[C-Rex]

Yea those pics were shite!!
Let us know when the car is back together and we'll get a few pics:cool:

[180sxbreaker]

I'll be ringin ya sat as it will defo be back together for then

[C-Rex]

Nice one have that old cone ready so for a few buns around the yard

[180sxbreaker]

Nice one have that old cone ready so for a few buns around the yard

y are ya bringin over your s14 to do the rings?? haha

[subzero]

diffin in the lawn !!

yes i agree, you phone is crap . if c-rex doesn't get over the wkend (his camera is well overdue getting turned on anyways) ... ill call during the wk. car looks sooo much better in person.

[doug]

martin tryd taking pics of this las night lads and he got more floor in the picture than car! haha

[180sxbreaker]

Fuck u Doug haha I like a bit of scenery in the pics :):):)

[180sxbreaker]

Also proof is there lads I can't put up pics till one of these girls come over with their fancy 52000 mega pixel cameras
So blame them if pics not up here say evening :)

[180sxbreaker]

Well boys and girls a few pics as promised, now they not the best i still have a few bits to do as in gauges and i havta change coilovers so i'll be goin for more low
today was its first day that it drove out of garage as a full car

so from this
http://i980.photobucket.com/albums/ae284/180sxbreaker/IMG_1249_1.jpg
to this
http://i980.photobucket.com/albums/ae284/180sxbreaker/010-20.jpg?t=1327859048
http://i980.photobucket.com/albums/ae284/180sxbreaker/011-15.jpg?t=1327859189
http://i980.photobucket.com/albums/ae284/180sxbreaker/012-18.jpg?t=1327859428
http://i980.photobucket.com/albums/ae284/180sxbreaker/013-16.jpg?t=1327859581
http://i980.photobucket.com/albums/ae284/180sxbreaker/015-9.jpg?t=1327859780
http://i980.photobucket.com/albums/ae284/180sxbreaker/016-7.jpg?t=1327859968
http://i980.photobucket.com/albums/ae284/180sxbreaker/017-6.jpg?t=1327860047
http://i980.photobucket.com/albums/ae284/180sxbreaker/018-9.jpg?t=1327860191

all views welcome some will say fibreglass and rotas but funds not allowing me to buy dish so thats how tis stayin till money frees up

[pepsterx]

Gay !!!!

[pepsterx]

Nah only slagging lad, :p:p:p It looks nice and tidy, would deffo benefit from a nice set of rims :) But fine as it stands :)

P.S. i was fully convinced you broke it :p

[180sxbreaker]

Gay !!!!

fuck u haha

[pepsterx]

Spray them ROTAS bronze and it will look better just my opinion though

[20vees]

looks savage martin, i like the spot where you put the hydro i might do the same ...did you come across any problems mounting it there?

[Mac_C]

Looks the part man ! The fone pics ya sent me done her no justice !

Pull that tint off tho for some black stuff .

[180sxbreaker]

looks savage martin, i like the spot where you put the hydro i might do the same ...did you come across any problems mounting it there?

sliding seat forward is a problem at moment...and thanks

[180sxbreaker]

Looks the part man ! The fone pics ya sent me done her no justice !

Pull that tint off tho for some black stuff .

it looks different in person arius..i kinda like it

[Darenm]

My god u really have pulled this off :p

Looks sweet lad nice set of wheels will really set it off but sweet as it sits now

Can't wait 2 see it in the flesh must find time 2 get up 2 ya

[180sxbreaker]

My god u really have pulled this off :p

Looks sweet lad nice set of wheels will really set it off but sweet as it sits now

Can't wait 2 see it in the flesh must find time 2 get up 2 ya

ya welcome anytime just the weekend comin be not suited due to movin house any other time suits fine
and thanks for reply

[skinnynphats200]

Worth the wait for the pics! love the colour choice coz there isn't many black ps's around, looking very well Martin, fairplay

[sil8094]

unreal work
that turned out lovely . fair play man

[jonnyrb]

good job, really turned her around..only thing wrong with it is the window tint, easy fix tho

[batman026]

Nice job fella. Black ps13's ftw ;)

[180sxbreaker]

cheers for comments lad..

[D-turbo-lad]

looks the fucking business martin . and ya spray the rotas bronze and be lovely ... now dont brake it . drive it enjoy it and then sell it .. be a sinn ta brake her .

[Boguey001]

Looks a million times better in them pictures lad than any of the ones you sent me. Car looks savage lad and its a credit to ya. :)

[gary d]

it turned out really well. fair play for putting all the work into it and not breaking it

[180sxbreaker]

cheers for the replies lads... i'll try hold onto it anyhow... its goin for remap in 2 weeks so should make a difference then and i hav to nct it and try do a bit of drivin in it then

[180sxbreaker]

it turned out really well. fair play for putting all the work into it and not breaking it

cheers gary...i'm glad i didnt now....it came fair close tho haha

[garyae86]

i think the white and black is a nice combo there only one thing id do is get rid off that front bumper apart from that its sweet :afro:

[Romo]

Never thought I'd see ya put a car BACK together haha, good job man, looks sweet!

[subzero]

looking well, still better in person :D

id go dishu too when mulath allows . will look awesome against the black.

[alan moy]

Lookin mint now well ware lad we should all meet up for a photo shoot some day be a good laf

[180sxbreaker]

defo alan... and @ johnny ya i shit at takin photos it does look better wen lookin at it... they only pics from phone like...and u only seen it in garage wait till ya see it in day light
give a shout over during week yourself and paul

[THE BADGER]

savage! fair fucks to ya man.

[Prodrifter86]

Awesome looking car now!! fairplay for the bulid!

[C-Rex]

Looking great in them pictures so I can imagine it looks unreal in person!!

Will be over this week!!

[180sxbreaker]

Looking great in them pictures so I can imagine it looks unreal in person!!

Will be over this week!!
your more than welcome paul.. i told johnny the same.. i cant wait to do some more finishing touches and get out and drive the huer... and get it mapped and propper pics takin then too

[Simon]

is this Nixons old PS? Looks deadly Martin nice work..

[180sxbreaker]

is this Nixons old PS? Looks deadly Martin nice work..

hachihead on here use own it... thats who i bought it off of.. not sure who had it before that simon to be honest
i still hav a good few bits to do to it... i was mad to buy peter t's old wheels for this but funds didn't allow me at time..wen cash frees up again..i'll buy sum dish for it

[Kruizer]

Throw on the gold wheels for a look ;)

[180sxbreaker]

Throw on the gold wheels for a look ;)

they well gone brendan..they were 8j i needed wider

[Kruizer]

Call out to mine and we'll throw on the works for a look next week or something ;)

[RB26DETT]

Awesome car Martin, Best of look with it!

:cool:

[180sxbreaker]

@ brendan as much as i would love to.... i'm only 4 stud..

@ ross..cheers kid

[andyrob]

brill car lad, love black ps, gud luck with it,:)

[nikkisixx69]

looking good dude!! love black silvias! spraying the wheels bronze would look sweet , or fluro yellow haha :cool:

[BoyRacer_X]

Wow!! it looks unreal Martin!

I really want a ps13 these days....... :cool:

[180sxbreaker]

cheers lads for the replies.. i undecided with the wheels at moment i have a lad to buy them but nothing for sale with dish for rota money:p

[180sxbreaker]

pic of the bit of lock i have at moment,,, i gettin caught on the inside of chassis so a bit of modifying should see more lock again
http://i980.photobucket.com/albums/ae284/180sxbreaker/017-7.jpg?t=1328463545

ps. bonnet not lined up in that pic

[celicacrasher]

car looks savage.love these ps13

[pepsterx]

Dude Mondello next week, me and couple of other lads are going you should bring this out !!!:p

[180sxbreaker]

Dude Mondello next week, me and couple of other lads are going you should bring this out !!!:p

petko i hav still not drove this sine i drove it home from body shop...i must pll finger out tomorrow and do a bit to it

[pepsterx]

Mine has been sitting in the garage for last 7 months, i'm loosing interest, and at the end of the day these cars are meant to be on track, now stop being gay and let her have it !!!:p:p

[pole drift]

Mine has been sitting in the garage for last 7 months, i'm loosing interest, and at the end of the day these cars are meant to be on track, now stop being gay and let her have it !!!:p:p

Shotgun!!!!

[pepsterx]

Shotgun!!!!

Of course, Gav is coming with me but you boys can swap between cars :) and if Marty comes it'll be one more car you can sit in :p

[Kruizer]

Looks like Dermot did a good job :)

[180sxbreaker]

Looks like Dermot did a good job :)

ya dermot did a good job allrite to be fair, twas just a pain waiting for it,,

and thanks to pat kavanagh for the solid steering bushing too the other day, and thanks to ritchie aka batman026 for the rear quarter cards too.. and thanks to doug s14 for the help with the car and billybgt130... thanks for your help doin the finishing touches to the car :kiss:
and there was a lot of lads that arent on here that helped out too along the route so thanks to them too
i have a few more plans for the car in the next few weeks as it is being mapped in about 2 weeks time
plans will be revealed in next few days

[D-turbo-lad]

go on martin be brave and bring her to mondello on sunday :D:kiss:

[180sxbreaker]

go on martin be brave and bring her to mondello on sunday :D:kiss:

tis far from ready for driving weekend never mind drifting:wink:

[180sxbreaker]

solid steering bushing that i got off pat kav on here..that i'm going fitting tomorrow
http://i980.photobucket.com/albums/ae284/180sxbreaker/014-12.jpg?t=1328659184

i also got jic magic rear coilovers tonight.that i'll be fitting too tomorrow as these are the final pieces to get the car out driving

[Stevo]

Good job martin fair play :D

[180sxbreaker]

Good job martin fair play :D

cheers stevo..tis fair hardship tho trying to get it right

[Drift_sil80]

fair play martin looks savage lad

[180sxbreaker]

cheers paul...

[doug]

some difference from when you got it to now!
dam right ya sayin thanks, id to lift 2 mirrors into the shed in the dark! haha

[180sxbreaker]

some difference from when you got it to now!
dam right ya sayin thanks, id to lift 2 mirrors into the shed in the dark! haha

and i think ya lifted the grill in too.....
ah no all jokes aside ya hav helped me out more than ya know kido

and this car now officially drives..:cool::cool:.. mind u, i have to raise it up a touch cause the father was behind me and all he could see was sparks from the exhaust rubbing the road:p

[hi_im_fil]

Haha it must be fair low. Looking forward to seeing this when you're finished

[180sxbreaker]

Haha it must be fair low. Looking forward to seeing this when you're finished

cheers bud, is too low in the back a the moment..i'll have to raise the back a touch tomorrow.. and i need tires all i could hear is strands of rubber hittin the inner arches... fairplay to damien shortt he believes in gettin value for money out of them tires:p

[SMOKIE]

fuck it she turned out well martin. fair fucks!

[180sxbreaker]

fuck it she turned out well martin. fair fucks!

cheers dave, i must try get it out it has being sitting out side door of house since them photos it has done nothing yet
i was mad busy after moving house and shit

[SMOKIE]

ill drop u a tex next time im passing there and swing by for a good look at it.
ill pm u there a few little tips on that supra aswell.

[dil]

pics like those me sad i dont have a ps13 :(:(

she looks unreal Martin!

[180sxbreaker]

pics like those me sad i dont have a ps13 :(:(

she looks unreal Martin!

cheers dil, i must get the finger ot and finish the huer

[NISMOS BIG BRO]

Jesus shes after cumin on sumtin serious since the last time i seen it , fair play !!

[Darenm]

Is this done yet Marty :p

[180sxbreaker]

I raised the car 1" at the back so exhaust not getting caught on everything now, i got wheel nuts and new tires comin soon and i booked it for nct today so it getting closer to being finito, i also done a bit of enquiring about getting it mapped
Hard to know who to get to map it, any views? rang 1 crowd i was told 370 bhp rang another i was told 320bhp........big difference there:confused::confused::confused::confused:

[180sxbreaker]

Went for nct today and failed on a ball joint and steering rack gator, but I am delighted with that as it was built from a bare shell up so they only minor things the main thing was emissions and noise decibels were passed so next week shoul see it with test

[PeterT]

I raised the car 1" at the back so exhaust not getting caught on everything now, i got wheel nuts and new tires comin soon and i booked it for nct today so it getting closer to being finito, i also done a bit of enquiring about getting it mapped
Hard to know who to get to map it, any views? rang 1 crowd i was told 370 bhp rang another i was told 320bhp........big difference there:confused::confused::confused::confused:

It's all about how it drives and how safe the engine is!

[Hachihead]

Seriously happy to see the end result with this.Sat in my garage for so long and i couldnt finish it and it gutted me to break it for parts but seeing it rebuilt now is absolutely savage.
Fair play Martin lad,I'll have to get a spin off her if she's still around when i get back from Oz.

[darren C]

I raised the car 1" at the back so exhaust not getting caught on everything now, i got wheel nuts and new tires comin soon and i booked it for nct today so it getting closer to being finito, i also done a bit of enquiring about getting it mapped
Hard to know who to get to map it, any views? rang 1 crowd i was told 370 bhp rang another i was told 320bhp........big difference there:confused::confused::confused::confused:

they all have simular setups there isnt goin to be that much of a differance figures mean nothing

[federal]

just read all tread.
amazing car transformation
good luck with her

[peteconneely]

Unreal car, did i see this in galway lastweek?

[180sxbreaker]

no not this one,

[tweek]

Yeah there is one in galway very similar i spotted it last week or the week before thought it was you aswell martin

[peteconneely]

ya looks very similar alright

[180sxbreaker]

i must chat to a few galway heads to see if they know who tis

[180sxbreaker]

car is officially nct'd today,, so i'm delighted to finally get some quality drivin time in it

[hi_im_fil]

Pics soon Martin?

[180sxbreaker]

yup very soon bud, wenever you want kinda thing

[hi_im_fil]

:D I'll give you a text some time next week to sort out something. I'm busy this weekend with prodrift

[galway joey]

i must chat to a few galway heads to see if they know who tis

serious build mate, came a long long way and a credit to you...

If im right in saying thats boss o'donal's car but could be wrong....

[180sxbreaker]

serious build mate, came a long long way and a credit to you...

If im right in saying thats boss o'donal's car but could be wrong....

if it is the same boss that had a bronxe 180 and white r32 tell him he still didn't send on a tax book for that 180 i bought off him

and cheers on the comment on build

[KenR32]

that car is unreal man, credit to ya!! i dont know the lad your on about but i know the PS13 ye mean, its a black 92!! saw it there bout 1 week ago in town!! lad that owns it lives out loughrea/ kiltullagh direction anyways! looks like decent shell but meant to have alot of problems underneath from what i hear!

[doug]

just had a look through the thread again, fair glad you didnt break it!

[180sxbreaker]

ya he from loughrea side, i not worried bout it shell was sold for track use anyhow

and cheers doug, i'll call to ya tomorrow with it

[D1 Chomer]

Unreal job done on this car. Cant belive its the same car u started wit. Credit to ya lad...