Fitting T28BB to s13

[steveonee]

Id be very greatful if someone could tell me, what I need to fit s14 bb t28 to
180sx.

I know gasket and an oil feed line but where can I get the whole lot and what else do I need??

Cheers in advance.

[steveonee]

Anyone??

[Arnie]

you need mani to turbo gasket and turbo to elbow gasket. Also oil drain gasket if you're replacing it. Also on the inlet side you'll need gaskets or silicone. Check the studs if they're ok, replace if necessary.

[skinnynphats200]

Get yourself braided oil feed and water feed and return lines, much easier if everything is braided. You will also need the adaptor for the intake on the turbo, the actuator as well, best of just getting a HKS one, and all new gaskets, mani - turbo, turbo - downpipe etc

[steveonee]

you need mani to turbo gasket and turbo to elbow gasket. Also oil drain gasket if you're replacing it. Also on the inlet side you'll need gaskets or silicone. Check the studs if they're ok, replace if necessary.

Will do


Get yourself braided oil feed and water feed and return lines, much easier if everything is braided. You will also need the adaptor for the intake on the turbo, the actuator as well, best of just getting a HKS one, and all new gaskets, mani - turbo, turbo - downpipe etc

This is the problem I have where can I get all these braided oil feed and water feed and return lines adaptor for the intake on the turbo

And will a t25g actuator not work??

[skinnynphats200]

Will do



This is the problem I have where can I get all these braided oil feed and water feed and return lines adaptor for the intake on the turbo

And will a t25g actuator not work??

The adaptor should come with the turbo if you ask or if not some1 on here will defo have 1 for feck all or else make one up yourself. Braided oil and water feed lines should be handy got off some1 on here or else Murray's or Barry's motorsport or else buy the lenghts of braided lines and some fittings and make them yourself.
Best thing to do is put up a wanted thread here and you should get everything your looking for.

Edit: Yeah a modified T25g will work but your best off just getting the HKS adjustable one for tyhe sake of 20-40 quid

[pauljosephfurey]

rad fix in liousbaun industrial estate do braided lines steve

[steveonee]

The adaptor should come with the turbo if you ask or if not some1 on here will defo have 1 for feck all or else make one up yourself. Braided oil and water feed lines should be handy got off some1 on here or else Murray's or Barry's motorsport or else buy the lenghts of braided lines and some fittings and make them yourself.
Best thing to do is put up a wanted thread here and you should get everything your looking for.

Edit: Yeah a modified T25g will work but your best off just getting the HKS adjustable one for tyhe sake of 20-40 quid

Got sorted for everything there bar the actuator on ebay hks ones makin 100 quid where are they for 40 man?

[serious tom]

Got sorted for everything there bar the actuator on ebay hks ones makin 100 quid where are they for 40 man?

Get one seconf hand floating about the forums man.

[skinnynphats200]

Get one seconf hand floating about the forums man.

Yep! I got a brand new one never fitted for 40 bucks