180sx clutch dampener loop removal?

[johnbro]

Is it ok to just bend the hard pipe directly back to the slave cylinder and bypass the dampener and loop system?

[johnbro]

Bump....

Anyone even know what I mean by this.;)
Read about in on some american 240sx drag racing forum
It's supposed to be a good mod if your running a bigger a/m clutch
and makes it bleed quicker apperently.

I just want to be 100% on this first

[tweek]

I'm running this on the track car but It hasn't been out much so I don't know how reliable it is

[Sideways Simon....]

Ya perfectly fine, i removed the damper loop thing in my old s14a and returned the pipe directly to the slave cyl, had no problems, and was like that for over a year

Just be carefull bending the original copper hose that it doesnt kink or else get a braided line

[diff06]

bend her round gently should be fine completely unnecessary part imo and a pig to bleed with them in place without a pump

[johnbro]

Thanks Lads, that's what I wanted to hear:afro:

[Dermot]

yeah it works 100% have done it on a few cars over the years and seen it done on loads

[way2fastforu]

works 100% had it done in my s13 an done it to a skyline as well
like said above jus be careful bendin the hard line tho