View Full Version : Tool for splitting rays wheels
skinnynphats200
09-03-11, 19:18
As above, anybody got something
you can buy them in most autofactors i bought mine only E5 a size 8 i forget the correct name for them, im sure someone knows it tho
you can buy them in most autofactors i bought mine only E5 a size 8 i forget the correct name for them, im sure someone knows it tho
multispline socket???
you'll need an 8 or a 10 for the bolt, and a 10 or a 12 for the nut on the back.
varies from wheel to wheel.
then just cut the sealant, and prise apart or use a rubber mallet.
there is no special tool.
(actually, im sure there probably is a special tool out there somewhere, but i'd bet nobody has ever actually seen one.)
skinnynphats200
09-03-11, 22:42
multispline socket???
you'll need an 8 or a 10 for the bolt, and a 10 or a 12 for the nut on the back.
varies from wheel to wheel.
then just cut the sealant, and prise apart or use a rubber mallet.
there is no special tool.
(actually, im sure there probably is a special tool out there somewhere, but i'd bet nobody has ever actually seen one.)
Yes I tried this multispline socket but the socket doesnt seem to fit exactly right it doesnt go on fully and the next size up is too big and I didnt want to risk ringing the head on the bolt
Tekno Twinky
09-03-11, 22:55
imperial and metric are slightly in between some sizes depending. its a standard tool
get a CLEAR pic of the head of the bolt up.
skinnynphats200
10-03-11, 16:14
get a CLEAR pic of the head of the bolt up.
Will do later, cheers
Fairly sure you can gets these sockets in halfords
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.