Nissan silvia s14.5 1jz powered........!!

[carpo]

Bought this car a while back off a member on here..
sold all the sr20 running gear out so said i would put a jzx90 engine into
it as i had a few low km engines here....going to sell this one when its finished
as ive another car ive a engine waiting for a 1jz conversion...:)

this car is a road car so will have heaters etc working

Here is the spec as it stands

masa sports front bumper
masa sports side skirts
masa sports rear bumper
masa sports frp front wings
kouki tail lights
work emotion rims 17 fronts 18 rears
s15 front end(hid headlights)
skyline r33 gts-t front brakes
cusco tension rods
tein tie rods and ends
flared rear archs
bride brix 3 drivers seat
greddy profec spec 2 boost controller
hks turbo timer
hks boost gauge
greddy oil temp gauge
a/m steering wheel


here is whats going into it.

jzx90 twin turbo 1jz engine with 55,000km
5 speed r154 gearbox from the above engine
exeddy clutch and lightweight flywheel
polished intake manifold
polished turbo pipe
polished rocker covers
japspeed 70 mm alloy rad
japspeed gt-r intercooler
custom one piece intercooler pipes
custom stainless exhaust system
apexi intake filter
greddy blow off valve
stainless custom down pipe
4.7 ratio lsd
engine painted in a new colour

also some other little trick parts

il update the thrend with pics of parts and of the work as it goes on..should
be complete and ready for some action in the next three weeks

here is the car as it stands...be more updates later this eve

4057

4058

4059

4060

[PeterT]

Pics ain't working

[pole drift]

Subscribed :D Pics work for me Pete

[Baz_180]

Pics are working for me!

Nice one Christy so be a serious machine by the time your finished!

[carpo]

sr20 engine out...picking it up off the bodyshop later with the engine bay
painted in a nice blue..and will also have the engine hopefully test fitted in the morning

4061

4062

[Eoin R.]

Some job! Nice handy car with a bullet proof engine!!:)

[MarkII]

are you sure that a twin setup will fit in a s14 Chris? i heard they wont fit as the brake and clutch master cylinders are too close for comfort to the rear turbo inlet. all s-body's run single turbo's for this reason.

[hi_im_fil]

I fuckin love this car. Its the car that made me start liking s-bodies. Post up as many pics as you can please!

[doug]

thats a gorgeous car i know the last owner and i saw it monday in the body shop too .. should be some machine when its done!

[Micko]

Nice job Christy!

Rumour has it your gona 1j the landcruiser next:D

[carpo]

are you sure that a twin setup will fit in a s14 Chris? i heard they wont fit as the brake and clutch master cylinders are too close for comfort to the rear turbo inlet. all s-body's run single turbo's for this reason.



ya they fit no problems....as there is nearly more room than running a single turbo 1jz vvti engine

http://i120.photobucket.com/albums/o175/carpo_01/blitz5.jpg

[carpo]

Here is a picture of the low km jzx90 engine and r154 gearbox that will be fitted

http://i120.photobucket.com/albums/o175/carpo_01/005-1.jpg

http://i120.photobucket.com/albums/o175/carpo_01/006.jpg

[carpo]

also going to use a jzz30 1jz soarer throttle body as the jzx90 one has
a trc unit on it

jzx90 throttle body

http://i120.photobucket.com/albums/o175/carpo_01/004.jpg

jzz30 throttle body

http://i120.photobucket.com/albums/o175/carpo_01/002.jpg

[carpo]

70mm gt-r alloy rad...

http://i120.photobucket.com/albums/o175/carpo_01/008.jpg




5 inch gt-r intercooler

http://i120.photobucket.com/albums/o175/carpo_01/009-1.jpg

[carpo]

Also got the jzz30 intake manifold all cleaned this morning just need to do the turbo pipes later and il get them sent off for a nice shiny chrome finish...:)

http://i120.photobucket.com/albums/o175/carpo_01/007-1.jpg

[ernie s14]

chris is gonna cry when he see's the car haha

gonna be some beast when its done..

[carpo]

Small update got the car back today from the bodyshop with the engine bay
painted up in blue...just need to go through a few bits around the bay in the morning and get rid of crap thats not needed and test fit the engine...

also got all turbo pipes,rocker cover and intake all cleaned so be sending them
off to england in the morning to get the chrome finish done..!!


http://i120.photobucket.com/albums/o175/carpo_01/001.jpg

http://i120.photobucket.com/albums/o175/carpo_01/002-1.jpg

http://i120.photobucket.com/albums/o175/carpo_01/004-1.jpg

[drift student]

this is goin to be very prettyfull :)

[Mick K]

This your road car squire?

[carpo]

this is goin to be very prettyfull :)

ya should be nice when done...im thinking when the rocker cover and inlet mani are all nice a chomed should look bling..:)


This your road car squire?

no lad...will use it for a few weeks but it will be going for sale...have something else i want to see what way a 1jz will fit in it

[POC]

Was class car before but will be Savage! What sort of power will it be pushing when finished?

[Mick K]

Serious job for a sales car Chris,Only shame is nobody in Ireland will pay for this sort of quality,It'll end up in Europe!

[carpo]

Was class car before but will be Savage! What sort of power will it be pushing when finished?

be running stock enough around the 350 mark...not much really needed as a road car as they have plenty of torque,


Serious job for a sales car Chris,Only shame is nobody in Ireland will pay for this sort of quality,It'll end up in Europe!

ya thats the problem...some guy in europe would be happy with it tho

[1-JAY-Z]

Whats the estimated sales price?

[carpo]

Whats the estimated sales price?

around the 8k mark

[1-JAY-Z]

around the 8k mark

Jesus if ya couldnt sell that in Ireland somethings seriously wrong!

[Robbie Daly Ps13]

Off topic Christy but where could I get a 4;7 diff......! Is this the ratio you run in your 15....!

[carpo]

Off topic Christy but where could I get a 4;7 diff......! Is this the ratio you run in your 15....!

i got a few of them before and thats the only one i have left there very hard got...no i use a 4.1 but changing to a 3.7 this year

[shines14]

is the chrome finish expensive to get done?

[carpo]

is the chrome finish expensive to get done?

it can be all depends what you need done etc...and the material you want it done on

[Greg]

around the 8k mark
That's for nothing. I'd nearly sell my Chaser to buy that.

Looking forward to updates on it.

[Mick K]

Fuck me thats a cheap car!
Robbed it off Chris I'd say:D

[Stuey]

What kinda power are you aiming to get? Great build btw

[chris]

nice job pm me price when its finished.missed this car since the day you took it:(

[NIALL JZX]

this will be bloody class when finished.....

except if u change that front bumper will look 10 times nicer ;)

[Mick K]

Niall is right,I never ever ever liked the bumper,Something as simple as to change it would nail that car!

[NIALL JZX]

Niall is right,I never ever ever liked the bumper,Something as simple as to change it would nail that car!

ya , too right , it will really make a job of it :)
best of luck with it lad..

[docco86]

did ur s14.5 not have he same bumper niall.

[NIALL JZX]

did ur s14.5 not have he same bumper niall.

no no , mine hade kazama promode front bumper ;)

[carpo]

nice job pm me price when its finished.missed this car since the day you took it:(


will do lad..


this will be bloody class when finished.....

except if u change that front bumper will look 10 times nicer ;)

ah i kinda like the front bumper is more rare looking than a uras or origin etc

[G.Lenihan]

this will b nice when finished

[chris]

front bumper is very expensive priced it before to have a spare one

[nikkisixx69]

wow!! this is going to be insane when its finshed!!! :cool::cool::cool:

[carpo]

Not have had had much time on it the last week been very busy,
Got the r154 all cleaned up and also got the engine mounts done and
the gearbox mount.

Got the engine into the car this morning for a test fit,will update with pics later,as im taking it out again to fit the chrome rocker cover,turbo pipes and inlet manifold which should be here in the morning


http://i120.photobucket.com/albums/o175/carpo_01/002-3.jpg

http://i120.photobucket.com/albums/o175/carpo_01/003-3.jpg

http://i120.photobucket.com/albums/o175/carpo_01/004-4.jpg

http://i120.photobucket.com/albums/o175/carpo_01/004-5.jpg

http://i120.photobucket.com/albums/o175/carpo_01/003-4.jpg

[southside cruiser]

gonna be sum car when she's finished lad keep us updated on the progress :)

cud be making you an offer on this yet !!!

[carpo]

Tiny update...been busy getting bits for the drift car and also work...just got these bits back this morning..and the finish the dude got on them is top class...if anyone needs chrome work done pm me...he'l even do rims..can do some funky colours...

rockers and turbo hard pipes...also got the helmet done for the laugh to see what way it would come up...

http://i120.photobucket.com/albums/o175/carpo_01/Picture030-1.jpg

http://i120.photobucket.com/albums/o175/carpo_01/Picture029.jpg

http://i120.photobucket.com/albums/o175/carpo_01/Picture033.jpg

http://i120.photobucket.com/albums/o175/carpo_01/Picture031.jpg



http://i120.photobucket.com/albums/o175/carpo_01/Picture028.jpg

http://i120.photobucket.com/albums/o175/carpo_01/Picture024.jpg

[Mick K]

Jeez man your lid looks unreal!

[garyae86]

ha ha shit that is class looking work there is it dear ????

[carpo]

ha ha shit that is class looking work there is it dear ????

No its no too dear...helmet was 120+ vat...around the same for the rockers etc
turn around time is around 2 weeks..as the guy is dead slow and it takes 3 days for them to dry fully

[matt-p]

Nice shine of the hlmet ha ..


class project will be a sweet spec'd silvia once finished

[chris]

any update christy.

[tamtaf]

Can't wait to see this finished

[carpo]

not much to update as haven't done much with it lately,should have a good update in the next two weeks

[way2fastforu]

looks like it'll be a savage road car for someone!!

[B&G Extreme Drifting]

Flawless build yet again, some boi christy!!

[jake4]

this is going to be epic when finished, cant wait!

[Noel]

how come i cant c da pic

[doug]

what came of this actually?

[damo86]

exported i think

[carpo]

No still have this not advertised tho...I will prob sell it over the next few weeks

[nikkisixx69]

No still have this not advertised tho...I will prob sell it over the next few weeks

pm me when you are!

[batman026]

No still have this not advertised tho...I will prob sell it over the next few weeks

pm me too lad please

[podgedun]

sent ya a message bout tis 3 or 4 months ago... Let me no a price...

[Steve K]

Is it finished or what state will it be sold?