View Full Version : Will this work??
how ye lads, was just wondering could ye help me out at this:confused:
Im getting a 5 stud conversion and brakes off jp's s13 think there ether z32 or r32, and putting them into my 180sx,but iv one problem, i dont have the handbrake cables, will the handbrake cables that are on the 180 already do for them?? thanks lads:D all advice greatly appreciated;)
You should consider a hydro hand brake you wont have to worry about the cable then..!!
would i need the origional handbrake for nct?
please lads im kinda stuck:confused:
Dunnedriftin
07-09-09, 20:59
would i need the origional handbrake for nct?
yes you will
yes you will
was thinkin that lad,sound
You can get hydro hand brake which will lock and i'v been told they will pass the nct.
You can get hydro hand brake which will lock and i'v been told they will pass the nct.
Ya but the standered 180 hubs are just disc were the 32 ones have drums and discs and the handbrake is going to the drums!
Thats new to me i didn't know that at all ya learn sumtin new every day!!
u will need cables from a 32 180 ones will not do
s13 handbrake cables should do the job, they worked on mine anyways.
s13 handbrake cables should do the job, they worked on mine anyways.
where they r32 brakes lad?
You will deff need the R32 cables lad, personal experance talkin,
the r32 set up is far better IMO than a hydro, once ya keep on eye on the shoes it will never ever let ya down unlike some of the hydros that iv seen,
You will deff need the R32 cables lad, personal experance talkin,
the r32 set up is far better IMO than a hydro, once ya keep on eye on the shoes it will never ever let ya down unlike some of the hydros that iv seen,
thanks lad, must try n locate a set of em, are they hard to fit?
not too hard, couple of hours, your best way i think is to strip all off the skyline, brakes, backin plate, every thing and transfer them onto your car, the skyline set up has the hicas balljoint attached where yours is just a hole for an ajustment arm to bolt on, pure f*ck of a job to get the balljoint out even tried gas, use the r32 callipers cause yours wont fit on over the bigger disks, you'll have no trouble runnin the skyline cables cause all the bolt holes line up sound, trust me its the best move you will ever make,;)
not too hard, couple of hours, your best way i think is to strip all off the skyline, brakes, backin plate, every thing and transfer them onto your car, the skyline set up has the hicas balljoint attached where yours is just a hole for an ajuctment arm to bolt on, pure f*ck of a job to get the balljoint out even tried gas, use the r32 callipers cause yours wont fit on over the bigger disks, you'll have no trouble runnin the skyline cables cause all the bolt holes line up sound, trust me its the best move you will ever make,;)
Cant wate to get them on now, theres hicas in the 180 will it bolt onto that?, ill be transferring hubs,disks,calipers, are brake lines simalar??
ahh your laughin so dude, only about 5 bolts to open and bobs your uncle fannys your ant, simples, once you have the flexy bit of hose comin out of the 32 caliper then your set, just the cables to hook up and adjust, job done,;)
ahh your laughin so dude, only about 5 bolts to open and bobs your uncle fannys your ant, simples, once you have the flexy bit of hose comin out of the 32 caliper then your set, just the cables to hook up and adjust, job done,;)
thats the job lad, are front hubs handy to fit too??
much the same dude, r32 and s13 are the same chassie so everything bolts straight on, just be carefull because with the 4pods up front ya might have trouble with some wheel fits, we did anyway, best of luck with it:D
where they r32 brakes lad?
sorry man i misread your post. i thought you said r33's. looks like yer sorted now anyways
sorry man i misread your post. i thought you said r33's. looks like yer sorted now anyways
no bother lad, looks like ill av to locate r32 cables sumwhere:confused:
no bother lad, looks like ill av to locate r32 cables sumwhere:confused:
well gerry.:D ask bart or yowdy , say dey will sort ya....
well gerry.:D ask bart or yowdy , say dey will sort ya....sound niall:D:D ill send them a pm sur, mad to get er on the road:p
i think i have a set of 32 cables will have a look
Get Hydrolic ted just as good have cables here do for them calipers if you need eny
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.