team kanjiuma rb25 powered s13 built by calicages racing

[podge]

it started out wit my r32 running rb25 running gear which unfornately ended up on its roof in stones drifting one sunday
after we were going to reshell all the running gear into a e30 bmw but wit the amount of fab tat was going to be required and two other cars to be built as well we decided just to go down the tried and tested 180 route wit rb25 running powers
spec of the running gear to be fitted
stantard block and head rb25
head oil drain kit
rb25 gearbox
custom apexi rx6 manifold wit 50mm external wastegate
greddy style inlet manifold
top mount fuel rail
evo 6 560cc injectors
split fire coilpacks
z32 airflow meter
power fc
bosch 044 fuel pump
sard fuel pressure regulator
alloy rad
custom front mount intercooler
oil cooler and relocation kit
electric fans
choice of turbos stantard steel wheeled rb25 one or hks 2530
4.3 final drive wit two way diff
as the skyline was per accident
http://i176.photobucket.com/albums/w179/podge_07/progresssofarskyline003.jpg

http://i176.photobucket.com/albums/w179/podge_07/Image0008.jpg

http://i176.photobucket.com/albums/w179/podge_07/Image0009.jpg

the new shell tat i collected off nick180 sx on here
http://i176.photobucket.com/albums/w179/podge_07/043-1.jpg

http://i176.photobucket.com/albums/w179/podge_07/041.jpg

http://i176.photobucket.com/albums/w179/podge_07/042.jpg

http://i176.photobucket.com/albums/w179/podge_07/043.jpg

afaik the car was previsously run in prodrift as its seam welded etc and was never vrt,d
as i dont have much drifting experience im not going to bother doing much fab work on tis just enough to get it out and start drifting and wall tagging again
but most of all in tis build ill be going for relaibilty so it,ll be getting a custom mod docs wiring loom leaving just enough to run the bare estinals lights fuel pump and engine
suspension bits in tis is going to be
rear
tein rear coilovers
locking collars
all driftworks rear arms
rb25 rear hubs brakes and half shafts
front
s14 custom hubs wit skyline discs and pads
custom rb25 subframe
custom tie rods and ends
tein tension rods
will get more pics after work is started but hoping to get the inside and under the bonnet sprayed wit in two weeks and start to bolt bits on

[tweek]

Fair play podge looking forward to seeing this.
Your fond of yellow s bodies lol.

[calicagesracing]

She won't be yellow for long lol

And try not to do too much "walltagging" with this one Podge:D

[podge]

Fair play podge looking forward to seeing this.
Your fond of yellow s bodies lol.
tats no two now the silvias going a new colour thou as soon as tis is running:D

She won't be yellow for long lol

And try not to do too much "walltagging" with this one Podge:D

tats for sure should be wit in paint wit in the week all going to plan
aw just a small bit lol i want a compact:cool:
both cars when to there new home to do thanks to nick for the garage space

[1jsoarer]

I have the front wings and over fenders off this on my road car!!!......:D:D

[podge]

I have the front wings and over fenders off this on my road car!!!......:D:D

ill be over to collect them soon then as they,ll be a direct fit on lol:p

[grimix180]

y are u goin with a custom subframe when a r33 subframe will bolt straight in and the engine is a straight bolt in then esp as your not movin the engine back

[podge]

y are u goin with a custom subframe when a r33 subframe will bolt straight in and the engine is a straight bolt in then esp as your not movin the engine back

im moving the rack forward

[japman]

well lad i hadnt a clue whos skyline ya were on about to me ,,, thats my friends old skyline mike caulfield ,, small world ,,,,,

[podge]

right small bit more done over the last few days car is all sanded down under the bonnet and inside and primred
i thought i had all th car cleand then till i started to primer how wrong was i dirt started coming out of every nook and cranny and made a bit of a cunt of it in places but i said feck it as its only a track car and a bit of a missile to play and learn in
so few pics not the best quality as taken on phone also got first coat of paint under the bonnet to see wat it looks like
http://i176.photobucket.com/albums/w179/podge_07/020.jpg

http://i176.photobucket.com/albums/w179/podge_07/019.jpg

http://i176.photobucket.com/albums/w179/podge_07/014-1.jpg

http://i176.photobucket.com/albums/w179/podge_07/018.jpg

and under the bonnet in paint few small runs in it not bad for my first time spraying thou

http://i176.photobucket.com/albums/w179/podge_07/017-1.jpg

http://i176.photobucket.com/albums/w179/podge_07/016-1.jpg

http://i176.photobucket.com/albums/w179/podge_07/015-2.jpg

http://i176.photobucket.com/albums/w179/podge_07/015-1.jpg

[podge]

being doing a bit at tis again the last few days and tis evening got a nice bit done got all the painting finished under the bonnet and inside well happy wit the result as it was my first time spraying something tis size
few pics

starting tis morning
http://i176.photobucket.com/albums/w179/podge_07/002-4.jpg

paint all on now

http://i176.photobucket.com/albums/w179/podge_07/004-3.jpg

http://i176.photobucket.com/albums/w179/podge_07/005-3.jpg

http://i176.photobucket.com/albums/w179/podge_07/006-3.jpg

http://i176.photobucket.com/albums/w179/podge_07/007-3.jpg

http://i176.photobucket.com/albums/w179/podge_07/008-3.jpg

http://i176.photobucket.com/albums/w179/podge_07/008-4.jpg

http://i176.photobucket.com/albums/w179/podge_07/009-3.jpg

http://i176.photobucket.com/albums/w179/podge_07/011-3.jpg

and as i left it tis evening
http://i176.photobucket.com/albums/w179/podge_07/012-3.jpg

also got the steering rack modified to hopefully stopping it going over centre cut the centre out of it and rewelded it further forward hopefully it works

http://i176.photobucket.com/albums/w179/podge_07/016-2.jpg

http://i176.photobucket.com/albums/w179/podge_07/015-3.jpg

http://i176.photobucket.com/albums/w179/podge_07/014-3.jpg

http://i176.photobucket.com/albums/w179/podge_07/014-2.jpg

http://i176.photobucket.com/albums/w179/podge_07/013-2.jpg

also got underneath all the sanded down wit a wire burst and any rust spots tat were in it treated wit rust killer and zinc primed no pics of tis but hopefully ill get out tomorrow and get it all sealed up wit body shutts and take a few photos

[joey banana s14]

good stuff man pretty much how mine stands at the min,,,the race is on:D

[podge]

good stuff man pretty much how mine stands at the min,,,the race is on:D

the race is on big time money now will be the limiting factor hopefully have it back rolling now in the next week or so

[podge]

right a bit more done now at tis again got the engine wiring loom roughtly fitted into place tonight unsure if it,ll be staying tis way or if im changing it to run more away from the turbo and exhaust
also started to fit a few small things back to the engine bay and inside clutch slave cyclinder and pedal brake cyclinder and pedal and all connected back up bar the rear ones
http://i176.photobucket.com/albums/w179/podge_07/005-4.jpg
http://i176.photobucket.com/albums/w179/podge_07/004-4.jpg
fitted the front coilovers and hubs and brakes fitted the discs and calipers off the skyline slightly bigger than s body brakes also fitted uprated pads and braided hoses
no pics a these forgot to take them
also did a trial fit of the rad and intercooler as i wanted to mount the intercooler high up and far back outta the way incase or a front end tip and to make sure it woundn fowm the front bumper or bumper bar
http://i176.photobucket.com/albums/w179/podge_07/003-4.jpg

http://i176.photobucket.com/albums/w179/podge_07/001-6.jpg
and as i left it tis evening
http://i176.photobucket.com/albums/w179/podge_07/006-4.jpg

http://i176.photobucket.com/albums/w179/podge_07/002-5.jpg
plan over the weekend if the beer dont take over is to get the rear subframe and diff stripped from the skyline and get them fitted in

[ae86....]

keeping a close eye on this...

brillant build...

[Eoin R.]

cool job podge lad! wat color you goin with???

[podge]

bit more done at tis again all the underneath sanded off zinc primed and shuttz all suspension in and rolling again brakes all in and plumbed up hydro fitted and plumbed
also being playing wit the dash and trying to fit a way i like all the guages to fit into it
so heres a few pics
under sealing all done
http://i176.photobucket.com/albums/w179/podge_07/009-4.jpg

http://i176.photobucket.com/albums/w179/podge_07/010-3.jpg

http://i176.photobucket.com/albums/w179/podge_07/012-5.jpg

rear subframe and diff and coiovers all back in and refitted
http://i176.photobucket.com/albums/w179/podge_07/011-4.jpg

http://i176.photobucket.com/albums/w179/podge_07/011-5.jpg
front all in
http://i176.photobucket.com/albums/w179/podge_07/016-3.jpg
and back on the ground and rolling at last for the first time in about a yr or so and looking like i might need slightly bigger arches lol

http://i176.photobucket.com/albums/w179/podge_07/019-1.jpg

http://i176.photobucket.com/albums/w179/podge_07/018-1.jpg

http://i176.photobucket.com/albums/w179/podge_07/017-2.jpg

http://i176.photobucket.com/albums/w179/podge_07/016-3.jpg

[pole drift]

Nice work, are there spacers on that??

[podge]

Nice work, are there spacers on that??

cheers man
no no spacers:D

[nick180sx]

cheers man
no no spacers:D

yeah there is on the front to clear the callipers...podge wouldn't know though as i'd ta put this back rolling as he's been lazy:p

[podge]

yeah there is on the front to clear the callipers...podge wouldn't know though as i'd ta put this back rolling as he's been lazy:p

u put the front subframe and rack in just lol everything else was there
ya forgot tat 15 mil spacers on front just for the wheels to clear the calipers

[S13..KEV]

She is comin on nicely podge

[pauljosephfurey]

nice build man

[podge]

righto bit more done the last while engine and box are in now and sitting in place the engine seems to sit better in this than the r32 as theres loads more room to work on both sides of the engine but less room at the front
http://i176.photobucket.com/albums/w179/podge_07/168.jpg


http://i176.photobucket.com/albums/w179/podge_07/169.jpg
anyone guess the turbo:psteel wheeled rb25 turbo modified to fit a top mount apexi manifold wit internal gate welded closed so i can run an external wastegate:D
http://i176.photobucket.com/albums/w179/podge_07/173.jpg

also for added reliablity i fitted a oil cooler and relocation kit to make oil changes easier
http://i176.photobucket.com/albums/w179/podge_07/170.jpg

also refitted and made brakets for the electric fan oil cooler and intercooler all mounted high and well back behind the bumper bar to hopefully protect them a bit if the worst happens
http://i176.photobucket.com/albums/w179/podge_07/168.jpg

http://i176.photobucket.com/albums/w179/podge_07/171.jpg

http://i176.photobucket.com/albums/w179/podge_07/172.jpg

also started to fit the front wings so i can start to lower it and get the ride height sorted and make brakets to hold the wing at the front
http://i176.photobucket.com/albums/w179/podge_07/174.jpg

[podge]

not much of an update but got the propshaft made for this and fitted during the week
http://i176.photobucket.com/albums/w179/podge_07/002-7.jpg

also took it out of the shed where i was working and got it up to calicages racings yard where work will start in the next few days on building the cage and intercooler pipe work and basically getting it finished and ready for out
more pics when work starts

[Robbie Daly Ps13]

Looking go lad should be a good competive car....! Why u paint the inside and then put a cage in after...... :huh:

[podge]

Looking go lad should be a good competive car....! Why u paint the inside and then put a cage in after...... :huh:

hopefully it,ll be competive some day but the way things r at the min it,ll just be used for pratice days
theres plates in the floor for a cage so im just gonna throw a bolt in cage into it and build a proper shell when moneys a bit more flush
plus if i stack this shell its just a matter of bolting everything out and into another 180

[podge]

so got a few more small bits done at this again got nelly out with the welder and we made up the intercooler pipe for the turbo side really happy with the way it turned out it fits like a glove and only 2 samcos needed so hopefully will lessen the chance of boost leaks or pipes blowing off
http://i176.photobucket.com/albums/w179/podge_07/003-5.jpg

http://i176.photobucket.com/albums/w179/podge_07/002-8.jpg
to clean them up and freshen up the engine bay i sprayed them blue just need to get lacquer tomorrow and finish them off
http://i176.photobucket.com/albums/w179/podge_07/010-4.jpg

http://i176.photobucket.com/albums/w179/podge_07/009-5.jpg

http://i176.photobucket.com/albums/w179/podge_07/005-5.jpg
also to freshen the bay i pulled off the rocker covers and cleaned them down and sprayed them up
http://i176.photobucket.com/albums/w179/podge_07/001-8.jpg

http://i176.photobucket.com/albums/w179/podge_07/008-5.jpg

http://i176.photobucket.com/albums/w179/podge_07/007-4.jpg
will update more over the next few days as we get more jobs done

[tweek]

What is the story with the clutch in the background of pic 5???in the same pic is that your toolbox/trolley on the right lol

[Dori_Rory]

Im liking this...good job man!

[podge]

What is the story with the clutch in the background of pic 5???in the same pic is that your toolbox/trolley on the right lol

thats the one from nellys car
no thats nellys new pit wagon lol

[podge]

Im liking this...good job man!

cheers dude

[podge]

been busy in the shed the last few weeks wit a few other on going projects down here and with me haveing exams the last few weeks as well eventually burst on this week at it
first was first today i went and ordered in a few parts i want to do to the engine mainly a new water pump as rbs suffer with heat also decided to change the timing belt as and tensioner and idler as i dont know when they were last changed also ordered all new oils for it new gearbox and diff oils 80w90 and valvoline 20w 50 for the engine new spark plugs and a new fuel filter

so on with a bit more work for the cage i robbed nellys old bolt in one from his time attack car and have that half fitted atm need to get a few more extra bars onto it for the harness,s and also a cross bar then pull it all out again and spray it up
http://i176.photobucket.com/albums/w179/podge_07/005-7.jpg

http://i176.photobucket.com/albums/w179/podge_07/004-7.jpg

http://i176.photobucket.com/albums/w179/podge_07/003-7.jpg

http://i176.photobucket.com/albums/w179/podge_07/002-9.jpg
also we started on sorting the front hubs ackerman just fixed so far on both and next job is to sort the roll centre aadjusters on each

http://i176.photobucket.com/albums/w179/podge_07/006-6.jpg

http://i176.photobucket.com/albums/w179/podge_07/008-6.jpg

[podge]

forgot to take pictures of the modified arms and hubs and tie rods before i fitted them today but if i have them out again ill take pics also got the dash built up with all the clocks and boost controller etc dont think ill have time to flock it before its first time out but u never know will get pics of this tomorrow
heres a few pics of the front arms fitted wit no set up on them yet only a few rough estimates
camber much
http://i176.photobucket.com/albums/w179/podge_07/002-10.jpg

http://i176.photobucket.com/albums/w179/podge_07/004-8.jpg

http://i176.photobucket.com/albums/w179/podge_07/003-8.jpg
lock much lol
http://i176.photobucket.com/albums/w179/podge_07/006-7.jpg

http://i176.photobucket.com/albums/w179/podge_07/005-8.jpg

http://i176.photobucket.com/albums/w179/podge_07/008-7.jpg

http://i176.photobucket.com/albums/w179/podge_07/007-5.jpg
aim now is to have it finished by the 24th for the m1 drifting if i can it might be rough the first day out but hopefully will be running 110% with some luck

[mark]

hey will you throw a cover over that 350z for me, ha,

[patt]

coming on nicely

[podge]

hey will you throw a cover over that 350z for me, ha,
is there one here for it plus as myself and nelly converted it to a vert last nite it may get used to the inside getting wet lol

coming on nicely

cheers man

[podge]

project as had nothing done wit it of late due to work etc but i finished last week and thing will hopefully move on now again as ive gathered a few parts thanks to keven kinnergan fittied all the suspension in the front and got it back on the ground for the first time in months heres a quick pick of the way it looks sitting on the ground
http://i176.photobucket.com/albums/w179/podge_07/001-9.jpg

[aka pete]

Lookin good man, ru goin to correct roll centre at the rear as well?