Removing sound deadening???

[pole drift]

Does anyone hav any tips for getting this stuff off?? I tried using a heat gun and some of i came off but it got sticky. Has anyone any tried and tested tips that actually work??

[Administrator]

Should come off easy on a good frosty morning with a hammer and chisel

[Mick K]

Dry Ice...............!

[git]

Dry Ice...............!

robbie ..............?

[paddy 180]

Should come off easy on a good frosty morning with a hammer and chisel

x2.. Most of it will break off in big enough pieces if you do it this way.. a bastard of a job whatever way you go about it tho:(

[Kaleb180]

x2.. Most of it will break off in big enough pieces if you do it this way.. a bastard of a job whatever way you go about it tho:(

x3 ... hell of a job joe , but this is pretty much the best way !
It will take some time to get it all off !!!

[Prodrifter86]

its actually not that bad. only around the tunnell. where its sticky. other than that it just all chips off.

[Daly]

Was only thinking this myself took me and a friend all day yesterday to get all of it out of a 180 two of us beating away at it for hours, hope i wont have to that again for years abseloutely sick of it :mad:

[ciaran r]

Dry Ice...............!


only thing for it

[Drift_sil80]

nooooo use a air chisel 10-15 mins job done rub of tinners after looks da beans ;)

[Dunnedriftin]

Liquid Nitrogen, have access to it in work :)

found out after i had removed mine tho, ment to work a treat :D

[sean]

where can you get liquid nitrogen is it expensive?

[Dunnedriftin]

where can you get liquid nitrogen is it expensive?

Need to have a license to have it ;) Cant just go out and buy it..

[sean]

were do you get that

[Dunnedriftin]

were do you get that

http://lmgtfy.com/?q=where+to+get+a+liquid+nitrogen+license+in+irela nd

:D

[sean]

burn..........

[kenny046]

burn..........

have u anything valid to add???

[sandstorm]

a bit of a tangent i know but why bother taking it out?
rules & regulations.. fair enough
weight.. does it save you that much?
or just the look of it...

[Aidan Hogan]

Its a cunt of a job :mad:
Hammer and chisel is how I did it , be prepared to slit your hands to bits haha


burn..........

Ahahahahaa liking his tagline admin :D

[dude]

hammer and chisel and a bit of good tar remover

[si_berry]

Ye your man Sean was an aweful tool!

[Kevin'c]

yea i heard the same thing about the dry ice.you leave it sit on it for about a half an hour and then just hit it a slap of a hammer and its sopost to just shater and come off?:)

[tweek]

Removing sound deadening lol a bit too fast too furious for me what are Ye going for ten second cars????

[Scamper]

Blow torch and a chisel, i had it out in no time!!!:)

[gofaster_s13]

Co2 fire extinguishers work the same as Liquid nitrogen, just horse it on and the sound deadening breaks itself off in big slabs.

[pole drift]

Co2 fire extinguishers work the same as Liquid nitrogen, just horse it on and the sound deadening breaks itself off in big slabs.

Good lad, im off to "acquire" a fire extinguisher :D

[Spartacus]

Where would you get dry ice? :o

[gofaster_s13]

Good lad, im off to "acquire" a fire extinguisher :D


You'll need about 3 of the big ones.

[clifford106447]

i took all mine out wit a hammer and chizle and for all the work and time there is not that much weight in it. i think for work+time not worth it in my opinion

[gofaster_s13]

i took all mine out wit a hammer and chizle and for all the work and time there is not that much weight in it. i think for work+time not worth it in my opinion

Half an hour does it if you use Liquid Nitrogen or Co2 fire extinguishers.

[DaveM-sport]

Found out by accident, brake fluid split and left soak into it lifts it up in huge chunks too! :)


I haven't had much problems with heat gun and chisel but Liquid nitrogen makes it very easy if you can get it.

[Alan B.]

yeah, freezing is the only way to do it fast.
do it right and it comes out in one large sheet.

http://www.youtube.com/watch?v=E9LP7dS7uUw

[conor]

where do you buy dry ice ????

[rps-13]

any plumbing shop should have pipe freeze in an airasol

[fitzer]

i just picked up a metal bar and started batin the shite out of each sheet and it came up in big sections. leaves little dents in the floor tho doin it that way

[jj05y]

dryice.ie will deliver. 10kg in pellets was 60quid. would do 2 cars.

[Big P]

dryice.ie will deliver. 10kg in pellets was 60quid. would do 2 cars.

I have priced it u at a supplier of dry ice €50 for 10kgs it's in santry near Dublin airport

[jj05y]

aye,,, 60 included next day delivery,

[Smokey Bear]

Got shit sick of it the other night and just started baitin the stuff with the hammer. If you hit it at a slight angle to the panel with the edge of the hammer it literally flys off in massive chunks. No need for a chisel.

[Paddy drifter]

i parked the car in the sun and using jus a chisel i peeled it off

[Stephen R32]

I have no willy

[Chuck_g]

I have no willy

Ah shiiiiiiiiiiiiiiiiit, you can borrow mine kiiiid! :wink: