sr20det engine bay pics or info

[s13 drifter]

ok so basically im lookin for a bit of help from anybody here who has an sr2odet with front mount intercooler and bov.im tryin to figure out which standard intercooler hoses are supposed to be blocked up and where all the rest of the vac pipes etc go.if ye coud please post up close up pics of yer engine bay(turbo side)so i could have a look or any info would be great.

below is mine...does it look correct?i didnt put on the intercooler so it hard to know where to start

also what are the two components circled in red?are they needed?any other engine bay pics ive seen have them removed

thanks

http://i591.photobucket.com/albums/ss351/s13-drifter/b7c127fc-1.jpg

[missfemale]

think i have one of the 180 here on laptop il post it up dont think its that close though but might help?

i dont ,,,,,,,, sorry but eres a vid it zooms on engine bay

http://www.youtube.com/watch?v=GMIJftUGV4A&feature=player_embedded

[twin-cam85]

bottom 1 circuled is your boost controller could be wrong

[s13 drifter]

nice 180sx!!sounds sweet.both of the bits ive circled are gone in yours>any idea why or what they are?! thanks

[darren C]

u can jst take dem pipes off completely... dat is only the stock boost controller... not needed. will post a pic of mine in the morning

[s13 drifter]

nice one.bit of the problem solved.so are both components part of the stock boost controller?part of that top one circled is joined to the turbo elbow.

[ian g sr20]

u can jst take dem pipes off completely... dat is only the stock boost controller... not needed. will post a pic of mine in the morning

dnt tke it out unless u hve an after market controoler lad,

the 1 near the head is a circulating valve u bin that

hers a pic of mine
http://i898.photobucket.com/albums/ac189/anto180/180%20and%20altezza/29062010216.jpg

[darren C]

nice one.bit of the problem solved.so are both components part of the stock boost controller?part of that top one circled is joined to the turbo elbow.

top pic looks like stock bov..
bottom pic is stock boost controller..
wat kinda turbo and elbo is on it ??

[ian g sr20]

nice one.bit of the problem solved.so are both components part of the stock boost controller?part of that top one circled is joined to the turbo elbow.

its an egr valve lad exhaust gas reculator , just cut the pipe wer it goes onto elbow and stick a bolt into the hose and a clip 2 keep it in until u get an after market elbow

[s13 drifter]

@ian ordered one 2 days ago of dw along with warlbro fuel pump so itll be getting the bin when they come.might be a stupid question bit if i bin the egr and stock boost controller, what do i connect the bov valve to??the new boost controller will probably have a diagram.....hopefully!


@darren it has standard t25 with standard elbow.will double check tomorro but 99% sure

[darren C]

its an egr valve lad exhaust gas reculator , just cut the pipe wer it goes onto elbow and stick a bolt into the hose and a clip 2 keep it in until u get an after market elbow


u are rite was think dare he stock bov on these is behind wing on passenger side..

[ian g sr20]

@ian ordered one 2 days ago of dw along with warlbro fuel pump so itll be getting the bin when they come.not sure about binning the recirculating valve as it is connected to the turbo elbow too

@darren it has standard t25 with standard elbow.will double check tomorro but 99% sure

bin it no ggod 2 u looks ugly just do wat i said cut the pipe and stick a bolt into the rubber pipe till u get ur elbow, do u nead a 3'' down pipe for it? hve 1 here 30e

[s13 drifter]

ill do that tomorro lad nice one.ill only need an elbow for it i have everything else for it.thanks for the offer tho

[s13 drifter]

Got my boost controller today.its only a manual one of driftwoorks for now.does this installation look correct as i got no instructions with it

http://i591.photobucket.com/albums/ss351/s13-drifter/70b16f72.jpg

i also disconnected the vac pipes from the stock boost controller as ya can see in the pic.is it safe to do this now that i have the boost controller installed?

[si_berry]

Top is your EGR
-> It sends excess gases back into the car, you can leave it on if you like.. it does not effect performance up through the rev range. Most peeps just remove it.

Bottom is your boost controller
-> it regulates your charged air pressure to the intake manifold (boost)
This is important, so do not remove it
EDIT* crap, didn't read full thread.. you have a new boost controller

And yes, I need the put joobs on T piping so nothing pops off :)

[s13 drifter]

thanks for the info!!is it safe to go ahead and take off the vac pipes to the stock boost controller?i wanna get rid of as much un-necessary pipe work/wiring as i can.

also does the dump valve look like its connected properly?

sorry if these questions sound retarded but theres pipes and wires all over the place sense the last owner so im tring my best to clear it all up