View Full Version : *Wanted* Halfshaft Bolts!
As above i need the 12 bolts to bolt up the halfshafts to the diff output shafts asap thank you please!
wont be online so call/txt me 0879898474
Just get standard high tensile bolts, 10.1 grade I think, ya might have to grind a corner off to fit in properly but will do the trick.
Just get standard high tensile bolts, 10.1 grade I think, ya might have to grind a corner off to fit in properly but will do the trick.
Any idea what diameter they are kav??
they are 8mm I'm sure, you'll prob only get them with a 13mm scanner head hence taking a corner off to get them to fit, had to do it with prop to diff bolts on BMW over the 65mm spacer used and haven't let me down yet
Motorfactor or wheres best to go looking for them kav :confused:
Depends on motor factors really, more likely a local hardware shop i'd say. there a place in lim called hassets and all they do is nuts and bolts, I'm sure there's something like that up your way.
An engineering place either Stevo,Naas Clutch and Gearbox Centre and ask for Steven and He'll sort ye!
Drive down past ashgrove interparts coming from main street,Take the turn right after it and drive down where the brothel used to be on your left,And you'll see a sign for it!
http://www.naasgearboxcentre.com/page4.htm
http://www.naasgearboxcentre.com/page4.htm
Cheers mickey :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.