Kiltokyo Tuning's HCR32.... (for those die-hard rb20 guys)

[GTSr32]

Heyya doing world!

http://i73.photobucket.com/albums/i223/106s2rallye/KILOKYO.jpg
is nearly back agian


Nearly 7 months ago sins it left the road and the tax office wrote asking why i wasnt tax'ing my car anymore, A long road of late nights, in a make shift shed, empty wallets and rosted creditcards was my path for the search for automotive perfection.

Some of u guys will know the car and some may not but i hope u all will enjoy the build of my Datson!

Ill start with a little bit of history~


Scored by Andy @ Powervehicles. One late night i found this HCR32, grade 4 with a C grade on the inside.
Happy to go ahead with placing bid on it i woke up the next morning to find an email saying YES you are the new owner of this.

http://i73.photobucket.com/albums/i223/106s2rallye/Rear.jpg http://i73.photobucket.com/albums/i223/106s2rallye/Front.jpg

After a small wait the car was back at andys yard! and on closer inspection it was found to have,

- Tein Super Street
- Bride Drivers seat
- Full exhaust from the Downpipe back
- HKS mushrum filter



http://i73.photobucket.com/albums/i223/106s2rallye/Skyline20GTS20T20M20287429.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/Skyline20GTS20T20M20282929.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/Skyline20GTS20T20M20281229.jpg

Anyway i could fill up pages on the up's and down's, but ill fill ya's in on the spec before it all got pulled apart.

Engine:

- HKS filter
- GTR front mount Intercooler
- GTR fuel Pump
- Full exhaust (Of unknow make)
- Turbo Elbow
- Samco hose's
- HKS Fcon-S
- HKS rad cap
- Nismo thermostat

Suspension:

- CST coilover (replaced the Tein one as they were shot)
- Front and Rear Cuscon strut braces
- Whiteline tension rod bushs
- Apex Front upper camber arms
- DW sub frame collers
- DW poly bush's in controle arms

Wheels

- Rota Torques (sorry lads not that rich) 17 x 9 all around
- 5Zigen Pro-Racer lug nuts

Brakes

- DB-Power Big brake kit 315mm
- Endless Super street

Transmission

- Spec Stage 2 clutch
- Tomei 2way Trax Advance
- Nismo Clutch Pivot

Body:

- Standard Kit with URAS monkey magic bumper

Inside stuff:

- Nardi Deep Corn + Bell short boss
- Greddy SMi Boost gauge + controler
- Fcon Navigator
- Turbo Timer (wow)

Pic's of my motor


http://i73.photobucket.com/albums/i223/106s2rallye/PIC_00096.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF1527777.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF1426.jpgpsp.jpg


The arty ones


http://i73.photobucket.com/albums/i223/106s2rallye/DSCF182333333333.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF18266666.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF1829999999.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF1832.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF1812222222222.jpg

Hollyshit its late ill post more 2moro

[Aidan Hogan]

Cool 1st post , nicely done , car looks very well too , nice changes made and looks clean as fuck :eek:
We need more of this over on Inoc !!

[mick-skyline]

ah chris your like bad sex, all the build up and none of the finale,

ill have to do one of these threads soon enough

[Stevo]

I pmsl mick :D Serious looking bus your building lad :cool:

[GTSr32]

The strip down begains and shows what work is ahead

http://i73.photobucket.com/albums/i223/106s2rallye/head.jpg


http://i73.photobucket.com/albums/i223/106s2rallye/block.jpg

Block,Crank,Rods were dropped off earlyer in the week, rebore .5mm over size with forged pistons to match, Arp,-Mains, Rods, and head bolts,

Also dropped off my new injectors to get flow tested !!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/CYLINDER1.jpg

Cylinder 1 seams to have been suffering from DET
http://i73.photobucket.com/albums/i223/106s2rallye/CYLINDER1.jpg

Its only really when ya look at a good(ISH) cylinder ya can see how DET has caused it to eaten into piston number 1

http://i73.photobucket.com/albums/i223/106s2rallye/cylinder3.jpg


and has left its marked !!

http://i73.photobucket.com/albums/i223/106s2rallye/CYLINDER1_detmark.jpg

[git]

rumour has it you went with cp pistons ??? if so id advise u pm me for your own sake and pocket !

[GTSr32]

rumour has it you went with cp pistons ??? if so id advise u pm me for your own sake and pocket !


Pm'd ya there but i recken i know what ur prob was

[Micko]

Fair play Chris ya dont hand around nor do things by half!!

Cant wait to see the complete article in the flesh, i demands a spin:D

[GTSr32]

Fair play Chris ya dont hand around nor do things by half!!

Cant wait to see the complete article in the flesh, i demands a spin:D

Cheers Ted! yea its been a long road tho i think i can see the light at the end!
hope fully turbo will arrive today

[Mick K]

Truely was a gorgeous road car!

[MANO]

Truely was a gorgeous road car!

x2 id love something almost exactly like that for road car. looking forward too the build:cool:

[GTSr32]

Block back deck and beautifully cross hached

http://i73.photobucket.com/albums/i223/106s2rallye/14thjune2010058.jpg

CP pistons in all there glory........ :p

http://i73.photobucket.com/albums/i223/106s2rallye/14thjune2010060.jpg

smile for ur close up! :D

http://i73.photobucket.com/albums/i223/106s2rallye/14thjune2010061.jpg

Full set of new lifters was gona go solid but no point as it ant gona be reving above 8500rpm :( , so got on to the guys at www.apexperformance.co.uk who sorted me out with a set for Very good money!

http://i73.photobucket.com/albums/i223/106s2rallye/14thjune2010063.jpg

tho i must say i rang my local nissan garage for the crack to see what kinda money they wanted for a full set!!!! O its a import we'll have to look into it! got a call back !!!!! There 90euro......(tuat for a sec class).......... then they said EACH LOL

www.PowerHouseRacing.com came up top dogs when a rang looking for valve springs from Supertech, so hope these will be controlling my valves at in the red area :D

http://i73.photobucket.com/albums/i223/106s2rallye/14thjune2010064.jpg

Picked up the rad from Nissan Doctor sum differance to the OEM item!

http://i73.photobucket.com/albums/i223/106s2rallye/14thjune2010062.jpg

And the best till last, picked up this PLAZMAMAN inlet with a Plaz throttle body too, must say build qulity is 100% as u can see from the pics below.

http://i73.photobucket.com/albums/i223/106s2rallye/plazmaman001.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/plazmaman004.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/plazmaman006.jpg

[Prodrifter86]

:eek: RB20 FTW!!!!!!!!!!!!!!!!!!!!! unreal car, and its mintt

[JohnC]

cant beat a 32.....nice car buddy

[cliff]

I was wondering when this thread would appear....

Good lad... Nice thread lay out / quality...

Know this car well, been following its progress for what seems like an eternity for its owner...
This isnt some thrown together slider... A real nice piece of work / skill built with quality parts and a keen eye for detail... I cant wait to see the finished item.. Kiltokio wont know what hit it when this is back alive...:D

A credit to you sir! Now get d fup off the net and finish it... Hope your snail arrived!

[GTSr32]

I was wondering when this thread would appear....

Good lad... Nice thread lay out / quality...

Know this car well, been following its progress for what seems like an eternity for its owner...
This isnt some thrown together slider... A real nice piece of work / skill built with quality parts and a keen eye for detail... I cant wait to see the finished item.. Kiltokio wont know what hit it when this is back alive...:D

A credit to you sir! Now get d fup off the net and finish it... Hope your snail arrived!

just arrived:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:cool:

[cliff]

Ill spin in on the way home this evenin for a gawk at it...

[docco86]

nice project thread mate..keep us updated..

[Robbie Daly Ps13]

Get the finger out and bring me 4 a spin....! :) Good work as always lad...!

[sr20]

sweet sweet 32 man, my favourite by far from nissan:D wats ur plans for the turbo?

[sc86]

dirty datsun scrap lol

it didnt need a rebuild to begin with
so much for being on the road for the summer, mayby summer 2011 ha

[Cefiro Panch]

hmmPlazzmann, if i was rich I'd have one!!

Lovely piece of kit!! And quite serious gains if car is set up right for it!!

[robbie@tdp.ie]

The angle on the cross hatch pattern appears to be wrong..

[GTSr32]

cheers for the comment! but how so ?

Its was done to Cp's spec?

[GTSr32]

More works Done!

Tho lots more works to do:p

As most know, unless ur buying crazy priced, well engineered s/s low mount manifolds, there is little... if anything..! to be gained from buying cheap s/s knock off manifolds for RB20/25 engines.

With this, and the turbo setup in mind..! Iv chousen the very itchy job of heat wrapping my standard Nissan manifold.
Now if anyone is going to do this for myselves PLAN it out first, cut a section and see how ur going to do every bit step by step n take a photot to remind you,

Kinda like this!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/27092010001.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/27092010.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/27092010002.jpg

Also u will notice half way through i coped it might be a good idea to wear gloves

http://i73.photobucket.com/albums/i223/106s2rallye/27092010004.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/27092010003.jpg

After lots of glass all over the place you will end up with something like this!

http://i73.photobucket.com/albums/i223/106s2rallye/Engine222004.jpg

And it would be rude not too!!!

http://i73.photobucket.com/albums/i223/106s2rallye/Engine111010.jpg

(heard soaking the heat wrap in water first also works better but it was very messy)

Another tip ya might find usefull is clear hi-temp paint is good for sealing the wrap when its finished also stops its front getting all fluffy.:eek:


On the hunt for a nice RB20 fuel rail, as with most "Nice RB20 bits" there not all that easy to come by, so bit the bullet and sigh'ed.... that i wasnt gona paying crazy money for a lump of ally with some holes in it (Agian cough: Plazmaman!) no matter how tempted i was.

But but recken i made the most of what it with a bit of elbow grease...:D

http://i73.photobucket.com/albums/i223/106s2rallye/Engine111015.jpg

Also as "Cefiro Panch" menshioned these plazmaman inlets manifolds are hardly cheap n i was a bit (only a small bit) anoyed to find that the Idle valve barcket that was weld'd in such away that caused it to warp,
Ok its always gona happen but you'd think Plazmaman would have sorted this before sending it? Just a taut and a bit of a rant but that life!!!!

hahah iv little to be worrying about!!!!

So ended up having to glue bits of sand paper to a straight and square block of wood, to get the bracket back straight n true...!

http://i73.photobucket.com/albums/i223/106s2rallye/Engine111013.jpg

Last job for now was to sort out the lower runner of the Inlet manifold

http://i73.photobucket.com/albums/i223/106s2rallye/Engine111014.jpg

[GTSr32]

The angle on the cross hatch pattern appears to be wrong..

CP say 30' - 40' which seam about right when i checked with a bit of paper cut to 35'

[tbk]

I thought you were meant to soak the heatwrap in water then apply it so when it dries out it becomes more taught:confused:


Thats what I do anytime I heatwarp anything. Bit sloppy and messy in places but keeps it all there and it doesn't come loose

[GTSr32]

Yup thats what i did!

[bubble1984]

love this build mate, im running the plazmaman manifold on my rb20 for 3 years now....

welcome to the club. ha. love your intake runners, im in the process of a similar build now. keep up the gooood work

love it

[GTSr32]

love this build mate, im running the plazmaman manifold on my rb20 for 3 years now....

welcome to the club. ha. love your intake runners, im in the process of a similar build now. keep up the gooood work

love it


Yea remember u having the only one for a long tim eon driftworks!!! giveme ur ARC induction box!!!!!!!!!:D

[bubble1984]

Yea remember u having the only one for a long tim eon driftworks!!! giveme ur ARC induction box!!!!!!!!!:D

hahaha, nope, im waitin on a new filter for it. gunna polish her up tommorrow :)

[GTSr32]

Been flat out at work,
BUT
http://i73.photobucket.com/albums/i223/106s2rallye/KILOKYO.jpg
been working over time late at night (sadly not getting paid time and a half) to get this RB lump back in gear!!!!!!

Engine aside for a min, I finally got the cage a Cusco 6 point dash avoider :p LOL sorced and in paint.


The 32 was rolled out and the nasty job of painting the cage in the NOT so well ventilated shed begain,
Even with: Mask, Gloves and Goggles i still managed to forgot to wear one of them at some point through out the painting.. :o

So after picking all bits of paint from the inside of my noise, scruding sticky paint from my hands and convincing myself "i could definitely see far better before i started painting this f'ing thing"

I was left with this!!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/Engine111008.jpg

My special home brew of hammerite gives a great bronze colour! I soon relised it really was worth all the hassle in the end!!!!

Back to the 32 in question my GTR bumper arrived, very happy to find it was in top nictch nick, with all the proper fittings etc.... couldnt resist getting the cable ties out and getting it fitted as soon as possable!!!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/Engine111009.jpg

note my very fancy engine stand! cost 10euro !!!!!


That brings us back to the engine!!!!:cool:

Bottom end built ! along with ARP head bolts awaiting head! ;)

http://i73.photobucket.com/albums/i223/106s2rallye/Engine111016.jpg

Head all bolted down, mmmmmm gona love RB's

http://i73.photobucket.com/albums/i223/106s2rallye/Engine222007.jpg

Thats all for now hope to get moving this week and have things turning soon!!!!!!!!!!!!!!!!

Keep ya's posted!!!

Over and Out
http://i73.photobucket.com/albums/i223/106s2rallye/MRTK.jpg
Mr TK

[driftescort]

Looking sweet lad! Love the way this is going. It's going to be a stunning car!

I have actually just got hold of a Cusco dash dodger for my own car that will be going in soon.

I'm also looking for a GTR bumper aswell. Did you get that off the GTR shop by any chance?

What turbo you going for?

[GTSr32]

Looking sweet lad! Love the way this is going. It's going to be a stunning car!

I have actually just got hold of a Cusco dash dodger for my own car that will be going in soon.

I'm also looking for a GTR bumper aswell. Did you get that off the GTR shop by any chance?

What turbo you going for?

Cheers man!!!!! no got in ireland i wont even tell ya what i paid!!!!!

[alan opel]

coming along great dude, will b sweet when back together, gtr front bumper is the only was foward:cool:

[driftescort]

Cheers man!!!!! no got in ireland i wont even tell ya what i paid!!!!!

Cheapy cheap or expensive?

[GTSr32]

expensive!!!!! from galway jap brakers! should have gona it from the GTR shop would have been cheaper.... but only a little bit cheaper lol

Also new Huge FMIC fitted getting the piping done on thursday for the turbo to intercooler ill have to wait till the engines in to finish the intercooler to throttle body!!!

[alan opel]

expensive!!!!! from galway jap brakers! should have gona it from the GTR shop would have been cheaper.... but only a little bit cheaper lol

Also new Huge FMIC fitted getting the piping done on thursday for the turbo to intercooler ill have to wait till the engines in to finish the intercooler to throttle body!!!


keith mchughs? his prices can be arseways!

which way you goin with the i/c to throttle body pipe? u going using the standard plenum yea?

[driftescort]

Do you mind PMing me what you paid for it mate if you don't mind, I am looking for one myself.

You are having a front entry inlet aren't you? Still might be worth a look at the pipework Mitto fitted to his 4 door R32. I have had a blip of his throttle and its bloody responsive!

What flywheel you going for?

[alan opel]

You are having a front entry inlet aren't you? Still might be worth a look at the pipework Mitto fitted to his 4 door R32. I have had a blip of his throttle and its bloddy responsive!

thats just what i was going to say! im getting a fmic soon, and dont like the way most of them run the pipe from ic to throttle body!

[GTSr32]

keith mchughs? his prices can be arseways!

which way you goin with the i/c to throttle body pipe? u going using the standard plenum yea?

Think thats who it was!!!!!

No ill be using a Plazmaman Inlet manifold!!!

Pic isnt great but ya get the idea this was before i panted the bottom runners

http://i73.photobucket.com/albums/i223/106s2rallye/plazmaman001.jpg

[Robbie Daly Ps13]

Im jizzing in my pants over that inlet driver.....! Sexy....!

[GTSr32]

Do you mind PMing me what you paid for it mate if you don't mind, I am looking for one myself.

You are having a front entry inlet aren't you? Still might be worth a look at the pipework Mitto fitted to his 4 door R32. I have had a blip of his throttle and its bloody responsive!

What flywheel you going for?

Yea Pm'd ya there now!!!!!

Yea gona be running the above manifold! what way is Mitto's pipe work done???

Also flywheel is the standard jobbie lightend and balanced with a simply mod that makes the clutch more grippy

[alan opel]

manifold it sweet, what TB is that? heres a pic of mittos..
http://img.photobucket.com/albums/v608/mittomatto/IMG_0185.jpg

its not a whole lot different than the usual way but does seem to be shorter...

[GTSr32]

Its a plazmaman TB too 70mm actaull the old one will fit inside this one lol
http://i73.photobucket.com/albums/i223/106s2rallye/Engine222008.jpg
nice the way u cant see any spring or anything!


Yea nice job the pic of mitto's !!!!! n he's saved alot of piping with it going around the rad!

[driftescort]

Yea nice job the pic of mitto's !!!!! n he's saved alot of piping with it going around the rad!

Ya I thought you could still consider the hot side. If I get a few bob together I deffo reckon I will be taking a spin up to Mitto to sort my pipes!

How much was the inlet if you don't mind me asking?

[GTSr32]

Its gone be near that, but with the GTR style FMIC im running its way to big to run around the rad like that!!!!

U can just see what i mean in this pic

(if u can see the white wire (where the head light shuold be) with the red bit of tape on the end thats where the end tanks end)

http://i73.photobucket.com/albums/i223/106s2rallye/Engine111009.jpg

RB20 Plazmaman Inlet Price:rolleyes: (https://www.plazmaman.com/shop/index.php?action=item&itemId=18)

[slithertooth]

Phenomenal build ,

[GTSr32]

Bit of a Sneak Pic of whats going on,

@
http://i73.photobucket.com/albums/i223/106s2rallye/KILOKYO.jpg

Its looking like this

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2884.jpg

Full report soon...........!!

[cliff]

Doesnt look like that no more... Its a tad sad... even tho I know the car and see the progress first hand I enjoy lookin at the thread...

[GTSr32]

Well well well

http://i73.photobucket.com/albums/i223/106s2rallye/KILOKYO.jpg

Seams to have been a little QT at the min but couldnt be further from the truth!:D

As some of u guys might have seen inlet and exhaust manifold in place

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2886.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2884.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2889.jpg

Many Thanks To Robbie @ Team SoLiD for hold these nice shinny bits which should go well to timing things up!!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/Engine222.jpg

Rear of the interior has been stripped, sound deading removed and painted.
(i know i know pic would be great)

Also thinking ill have to relocate the battery to the boot as this inlet looks like its gona be taking up a bit of space!!!!!
(yes yes i know pic's????? getting there, but a bit of a hint to here the engine is hiding now)

Sadly ill have to leave this report short as my camera bat has died!!!!!:mad:

But hope to have more pic's and information 2moro Turbo arrived too

P.S.
If anyone knows of a RB26 coilpack cover send it my way! Please:o

[bubble1984]

[Also thinking ill have to relocate the battery to the boot as this inlet looks like its gona be taking up a bit of space!!!!!
(yes yes i know pic's????? getting there, but a bit of a hint to here the engine is hiding now)


i didnt relocate mine at first as i fitted my plazmaman on o/t one time, it will fit but its a tight squeeeeeeeeze. im relocating mine at the minute :)

updates are deadly, must get some up meself. loving ur build mate

[PeterT]

That looks sexy time! any pics of the young wan :D

[GTSr32]

Now got pics up and Running...... well the camera up and running but ya get what i mean!


So here
@

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2931.jpg

Iv been busy busy busy... engine went from here

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2884.jpg

To there

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2899.jpg

To finally rest here

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2901.jpg

and what a smile it brough to my face, finally where over the hill and the way to getting this moving agian,

It even made me do this:

http://i73.photobucket.com/albums/i223/106s2rallye/MRTK.jpg

But didnt last to long as i remembered i had to put the Gerbox and prop back in.

Tho i recken the car even got excited as the box covered me in gear oil while putting it back in!!!!!!!

Anway ended up finishing the day with the engine and box back in so from the under see looks like this!!!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2907.jpg

So back to the engine! well turbo!!!!

Running with a T3/T4 hybrid set up custom built from CR Trubos in the UK and i must say what a top bunch of lads to deal with,

Now i rang everyone in the UK who cater in the "Turbo market" and these were the first to stop and actaully talk about how they were gona spend my money and what spec i was getting the pro's and con's etc.......!!!!!!!

So here's her close up!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2895.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2897.jpg

I know its not very flashy, in terms of cast HKS logo's but its whats inside that counts ant it, hopefully gona do the job!

Running Rb25 compressor and Turbine Housings so should flow a bit more
:cool::cool::cool:

Also as menshioned above in my last post! the rear has been transformed and looks like this

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2919.jpg

And finally........

As its getting a bit late now!!!!!!

From

"sc86"

My new and not so easy to get Brembo Drilled and Grooved Rear set up, Along Pbr pads,

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2908.jpg

Must say iv been running Brembo discs for ages and cant fauilt them and im hoping to be doing the same with the fronts very soon!!!!

[Robbie Daly Ps13]

Looking very very good Chris.....! And loving the way you spelt SoLiD..... lol...!

[pepsterx]

Credit given where due, and it's due here, well done so far lad keep up the good work:)

[GTSr32]

Looking very very good Chris.....! And loving the way you spelt SoLiD..... lol...!

That not the way u sell it LOL

[Robbie Daly Ps13]

That not the way u sell it LOL

I never knew it was a brand name......:p

[GTSr32]

i didnt relocate mine at first as i fitted my plazmaman on o/t one time, it will fit but its a tight squeeeeeeeeze. im relocating mine at the minute :)

updates are deadly, must get some up meself. loving ur build mate


That looks sexy time! any pics of the young wan :D

Yea hope i might get away with running one of those really small batterys! ( tho i like leaving lights on in the car so may not be the best idea)


As for the young wan one of the few time she was in the shed !!!!!!!! i got O its nice i sapose but im going inside its cold!!!!!! tut tut :cool:

[GTSr32]

How she's sitting!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2938.jpg

2 MORO ill mostly be sorting out this lot of NICE Hi-Grade S/S tubing!

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2904.jpg
(only coped thats only half of the piping i have:p)

In hoping that ill make some sort of intercooler piping out of it!!!! ;)

I also hope that I can tig it in such away so ill have a full continuous pipe from the turbo to the intercooler and vise versa from the intercooler to the inlet manifold so hope to only use 4 bits of Samco.

Avoding those power killing 90' bends!


Was bored ( i dono how with all the work there is to do ) but made up this:

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2934.jpg

As Cliff bud'd it my SNM sex box!!!! (i kinda know what he means tho) LOL or what i was hoping to call it my induction box!

Anyway more 2moro......... i Hope !!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/MRTK.jpg

OVER and OUT

:cool:

[Robbie Daly Ps13]

Looking savage lad....! Must call over 4 a peep and a waffle some night.....! Did you get all your bolts shined up....!

[GTSr32]

Cheers!!!!!! lad!!!!!!

Yea call over any time im off all day 2mro!

No didnt get them shined up??? or which ones ya on about?????????

[Robbie Daly Ps13]

They just look shiny....! I wanna get my bolts cleaned....! How would ya do them....! Yea might tip over at some stage...!

[Bobbys14]

Coming together nicely wont be long till she on the road again..

[Stevo]

Good work fella :)

[bubble1984]

this is looking savage, how much was the turbo and what kinda power u gonna be looking at. i LOVE everything about this build.

extremly tidy man. fair play

[GTSr32]

Bit of an Update Not alot
(but every bit counts):D

New Intercooler piping! Excusse the black and blue tape havnt TIG'd it yet, but i was able to make both pipes in one piece, well 2 pieces, but ya know what i mean!!!

This is the turbo to intercooler pipe......!!!!!
(o on that note anyone have a RB25 compressor elbow? the elbow that bolts to the inlet side of the turbo)

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2913.jpg

and the intercooler to inlet pipe...... ill need to weld a flange to this pipe for a dump valve but undecided on what make to run with!!!!!
Any input would be greatly appreciated.

http://i73.photobucket.com/albums/i223/106s2rallye/skyline1.jpg


More exhaust bits and insulation time agian..!!!!!!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/skyline2.jpg

Latest purchase was the tinny shinny water breather tank!

The one with the now new rad cap!! just incase ya cant see it.

Its n the top conner of this picture! bought it because there was now no bleed valve as it was connected to the old inlet...

http://i73.photobucket.com/albums/i223/106s2rallye/skyline.jpg
So hopefully it will do what it said on the box!!!!:cool:

And yes i know i COULD have done with out it but gona love shinny bits:D!!!!


Sorry pic's are crap it twas the phone

[GTSr32]

this is looking savage, how much was the turbo and what kinda power u gonna be looking at. i LOVE everything about this build.

extremly tidy man. fair play

Many thanks guys its getting there bit by bit!!!!!

Turbo was about as much as ya'd pay for a 2nd hand HKS turbo that would flow less! and this is brand new with garrett warenty, so there is no question really

(well ill stop before i say anymore n lets see how it runs before i go on with saying how great it is really have my fingers crossed thats its the setup i want)

To be honest im not gona be quoting power figures at the min for my engine, but in theory this turbo should flow about 420Hp.

[PeterT]

sweet, loving this thread! however, talking about making a flange for dumpvalve and what brand to use....DUMPVALVES ARE FRICKING HOMO!!

[meego1]

epic build thread chris, its a credit to ye, just see u saying about a dump valve their, tdp blocked of a few pipes on the bro s 32 and it gives it a massive pidgeon effect, if ur down in goldstone on the 5th ul see and hear it or just call over to JTOWN have a gander, just another option for ye:)

[GTSr32]

sweet, loving this thread! however, talking about making a flange for dumpvalve and what brand to use....DUMPVALVES ARE FRICKING HOMO!!

mmmmm! but ill have to run one i recken, but i was thinking of one of these.

http://www.tialsport.com/prod_bv_50.htm

[PeterT]

why would you have to run one?? 95% of drift cars dont, im sure oul robbie in tdp would advise them at the first chance he got if they needed one!

[GTSr32]

yea but 99% of drift cars are flat out most of the time! with quick gear changing! i.e throttle closed but open'd again very quickly!!

i think im my limited view when driven slowly (i.e traffic and road day to day its not to good for the turbo?) pressure wave caused by the closing of the throttle quickly, can stall the turbo?

tho ill look into it more...

[PeterT]

without meaning to clog your thread...its only internet myth about it damaging turbos. and sure flat out drift cars with 1.2bar boost etc being on and off power so much, that will be workign the turbo the most, hence why they come in red hot alot of the time!

some rb's, and also ca's etc never even came with recirculating dumpvalves, and im sure nissan spent alot of time and money researching what kills turbos! compressor surge sounds bad ass too :D

[GTSr32]

Hello all been long long time

Its to f'ing cold this weather to be out in the shed working....
Buts its xmass so time to relax a little :o

Back with a tiny update:

Some of the presents that have arrived early (thanks Santa:D )

Big thanks for Kev86 for holding on to this EastBear seat

Which i stickered up good and proper along with redying the cover to bring it back to life
http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2986.jpg

Pic of it fitted in its new home

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2998.jpg

Also a pic of the retrimed doorcards very happy with how these turned out!

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF3010.jpg

(i dono why it looks like its a different shade there half way up its not really)

Also got this cool fitting which has been very handly way of getting a hose to before the throttle body for the idea controle valve. Just cuts its way into the samco hose and then bolts down n seals itself

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2993.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2995.jpg


Sytec came up top dog on the hunt for a 90' bend for the fuel rail

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF2992.jpg


Last but not least, My new cam covers.
I finally got the time to paint them what ya's recken? not to bad of a finish for a LIdl compressor kit and hammerite home brew:D:D:D:D:D

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF3012.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/DSCF3013.jpg

[Aidan Hogan]

my god that engine bay is sweet as f**k , great work so far man :D

[cliff]

good man driver... was wondering was there anything getting done, aint heard from you in ages... And you have it all wrong - Christmas isnt for relaxing its for flat out hard graft to get her back on the road early new year!!:D

[P.s13 silvy]

Get out in the cold and do a bit gloves and a hat and rev up dat heater. Seats lukn gud now

[bubble1984]

WOW. love the engine bay man. looks savage. also whered u get the bride material and what did u stick it on with? loving the seat man. love the car altogether

[GTSr32]

bought it from one of the lads off here!

Used 3M spray glue! It shuld have been garduated on the front doorcards too but they glue i used to start off with was shit n fucked up !!! ;(

[Micko]

Did you not have a bride recliner in this aleady at some stage?

Engine is mint:cool:

[bubble1984]

bought it from one of the lads off here!

Used 3M spray glue! It shuld have been garduated on the front doorcards too but they glue i used to start off with was shit n fucked up !!! ;(

just the normal 3M spray mount is it? whos sellin it. i want. lol.

engine bay is unreal. fair play. lovin it

[GTSr32]

just the normal 3M spray mount is it? whos sellin it. i want. lol.

engine bay is unreal. fair play. lovin it


3M spray mouting glue! got mine in woodies


Cheers for the comments lads

Also Micko yes i still have the Bride Euro II seat its now goina be the comfy passanger seat! Just need a rail! im selling/swapping the drivers side rail! if anyone has one let me know

[B&G Extreme Drifting]

feic me man!!!!!! ur a credit to 32s & skyline prop rb head through n through can really c da heartship u went through..... prop prop car n i wish u da very best in it and wit it

she s sweet dis is just a reminder.... sur wat do u need a woman for wen uv a weapon lik dis.... jus 1ting bro is da rb25 box fitted??? da engine will jus spit da 20bak out!!!

got da butchy mobile home, sweet i jus dont lik 1 ting, i need maxol beside me, 740s jus swally it up 478& 1.5 boost on dyno dynostics lik dr. nics rolling road....oh yea wer thanks to nialler for sexy shiny cams haha buzzin

dis is serious ur a credit to da binliners yup yup yup wish u all da best cant wait c her blitzin tyres n smokin da place up!!!

jaysus i must apply for job in zara haha u shud b proud man credit to u!!!!alot hard work chat soon

[darren C]

serious build man engine bay looks mint :)
wat colour paint is on the rocket covers???

[GTSr32]

serious build man engine bay looks mint :)
wat colour paint is on the rocket covers???

Home bure of hammerite! buy a few tins n get mixing till ya find something ur happy with! I find its great stuff the amount of flake in it!:D

[GTSr32]

Engine is done!!!!!!! Just need a few cosmetic small bits for it to be complete! Pics up later when I get home

Now the body !!!! I'll be needing a GTR carbon bonnet if anyone knows of one going let me know and undecided on fitting n1 vents on my gtr bumper?

[cliff]

Dont do the n1 vents ted... 90% have them...enough said

[john84ie]

i want a spin in this before i go so get the finger out boy!ya get much done this week?

[seanie R.33]

some build,fair play to ya,enjoy'd reading every bit of it cant wait for the update!!

[stevokr32]

very nice so far it will be one of the best built r32 s around.:D

[GTSr32]

Well this is how it sits now

http://i73.photobucket.com/albums/i223/106s2rallye/ENGINEDONE6.jpg

:D

[B&G Extreme Drifting]

Well this is how it sits now

http://i73.photobucket.com/albums/i223/106s2rallye/ENGINEDONE6.jpg

:D
pimpin since bin pimpin, if it was nt for this ya d have damn nor a bitch

sweet lad, crackin job!! best of luck wit this machine.da hks pulleys n belt are serious wonder were u got dem :) :) :)
chat soon man, we l hav get it out on track :)

[GTSr32]

Little Update!

As iv actually be able to do some work! new job has me away from this to much latly! tho i recken ill fight back in the next few days now!

First off HUGE thanks to Roddie at IceTronix sorted the 3 of use out with some nice carbon bonnets n to be fare there spot on!!!!! Recken i was home all of 5 min before it was on the car, sparked me in to life to get this finished.

http://i73.photobucket.com/albums/i223/106s2rallye/ENGINEDONE16.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/22022011004.jpg

Above you'll also see the oilcoolers new home between the headlights alot of messing with the pipes to make sure they all ran ok n didnt kink but i got there! recken it evils up the front no end

Also thanks to "JDM" for the RB25 inlet elbow and spark plug cover, and to JoeyMc for letting me use this sand blasting box to get them all shinny n clean again.

Also after fitting the covers i found that the old metel clips that hold the coilpack loom in place had suffered from the heat and have become hard & brittle, so picked off all the plastic and out with the hammer to straighen them and used heat srink to coven them up again, recken they turned out well not a big job but dose tidy up the look of things!

http://i73.photobucket.com/albums/i223/106s2rallye/ENGINEDONE15.jpg

I had asked here but no one answered, Samco ducting hose for AFM to Turbo gona give it a go, but recken it should be spot on for what im after! Now all fitted!! tho kinda hard to see in the pic's below, also thanks to Darren for the Z32 AFM by the way and side mount rail!

http://i73.photobucket.com/albums/i223/106s2rallye/ENGINEDONE12.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/ENGINEDONE13.jpg

I had fitted the GTR injectors, but got alittle ahead of myself, as i didnt wanna start it with it over fueling like fuck with the big injectors and it might wash the bore, dout it would have but ya never know.

So ended up swaping back the old RB20 ones till i get it started and know everything is ok and untill my resistor pack arrives :)

http://i73.photobucket.com/albums/i223/106s2rallye/22022011001.jpg

As much as i love this Plazmaman Inlet! if found a prob ! dipping it for oil is now not so easy!

http://i73.photobucket.com/albums/i223/106s2rallye/22022011002.jpg
(yes i did scrach the water hose i had painted dam braded fuel hose! hence the rubber sleve that it wears now)

tho cable tie (is there anything they cant fix) and a rubber band will have to do for now to extend it under the inlet and to make it easy reach,still not easy but ill surrive!

http://i73.photobucket.com/albums/i223/106s2rallye/22022011003.jpg


SO after all that i had to put the bumper on again before paint to make sure all is well n have a look what the bonnets dose for it!


http://i73.photobucket.com/albums/i223/106s2rallye/ENGINEDONE7.jpg


Love this pic reminds me of a R31 (taken with the telephoto len, ya need it in my shed is so fucking small :p:p!)


http://i73.photobucket.com/albums/i223/106s2rallye/ENGINEDONE17.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/ENGINEDONE14.jpg

So now 2moro i hope to refit the Fcon and ECU, rob a battery from somewhere! (its in the boot now) and turn it over n hope and pray for oil pressure! LOL

[juice]

Christ thats serious, serious mood for another 32 with all these threads!!!!

[git]

what power ya lookin to get ?

[GTSr32]

Christ thats serious, serious mood for another 32 with all these threads!!!!

thanks alot of Time and effort has gone into it! Just want it to be right! And yes it seams nice 32's are popping up again recken it's about time too


what power ya lookin to get ?

Not sure about power tho should put out a nice figure I hope :o, built it strong, tho tuby ant huge so won't be laggy n should be nice motor to take abuse!!

[franky]

nice build :cool: best of look with it :)

[git]

thanks alot of Time and effort has gone into it! Just want it to be right! And yes it seams nice 32's are popping up again recken it's about time too



Not sure about power tho should put out a nice figure I hope :o, built it strong, tho tuby ant huge so won't be laggy n should be nice motor to take abuse!!

Ah i see ,besta luck anyway ........

[GTSr32]

Ah i see ,besta luck anyway ........

It should be somewhere in the hi hi 300s turbo is good for 420hp

[bubble1984]

oh my god, cant wait to see this car..... engine bay is unreal....

on another note,,,, that dipstick issue is a pain in d balls. i have d same problem but its worth it .... :D

[s15_spec_r]

serious motor man, can onli imagine the work ya have put into it, should be a mean mofo when shes mapped

[GTSr32]

Well on the 3rd hour o the 3rd day of the 3rd month the skyline barked it's self into life! Cleared it's cylinders n set to a cold idea!!!!!

Happy out

[GTSr32]

Well on the 3rd hour o the 3rd day of the 3rd month the skyline barked it's self into life! Cleared it's cylinders n set to a cold idea!!!!!

Happy out

[AndysR20det]

awesome build luv the car good luck wit her lad

[P.s13 silvy]

well good to hear it lad, hope she goes like a charm, keep me posted....

[GTSr32]

Well after this first start at crazy o clock! i went out in the day time n started it again left it to warm up and all hell broke lose!!!!!!!!!!!!!!!!!!!

started running on oil !!!!!!!! so stripped it down covers off, cams out ! and found a crack in the head beside one of the valve springs, :( it was behined! where my mechine shope had replaced a exhaust stud! some may know i was anoyed which the job they had done but i was told all was well and not to worry so on the WORD of the mechine shop, I installed it and now iv the job of pull the head off and replacing it....!

Hopefully next week ill have it done and running sweet like I taut it was !

tho the bill is now:

NEW H GASKET
NEW HEAD
AND MORE TIME!!!!!


Also anyone for some painting? Front bumper and Skirts! any takers?

[Micko]

Any come back of the said machine shop chris?

You can be as fussy as anything then somethin fucks up because of someone else. theres always something!

ill ask the bro about spraying the bits if your interested

[GTSr32]

Yea sure why not can't hurt to ask plastic gtr bumper and oem skirts easy stuff

[dude]

that was serouis bad luck man. all the same thats a class car with a serious amount of top class work gone into her well done

[GTSr32]

Well hello from misty hill of Kiltokyo, seams summer has come early and mist is rising, (I hope the same for the mist that's hanging over this never ending project!) the light of day has made the kiltokyo garage warm a little, but no less cramped to work in but we work with what we have, got some motavation from being at the drift day in mondello on the 8th! So spanners will be back in action 2moro all going well!!!

Tho the hard ship of the fucked head has ment iv to rewrap the exhaust manifold as it got covers in oil and water when taking it off, and if I don't do it now it won't get done!!

And that note a huge thanks to*calicagesracing who came to my help in sorting me out with a new RB20 head, *guys are top sound and down to earth wouldn't have any prob in gettin work done with them...

Also another huge that's to Colom in*www.tridentmnfg.ie who gave the rb20 head a fresh skim, new valve stem oil seals, recut the valves and lapped them back into the head, all in no time at all and even with fast turn around I was always keeped up to date with what was going on and what it needed, it was even delivered back to me on a Saturday great service!!

More thanks to the guys in www.conceptua-tuning.co.uk mightn't be the cheapest place to get stuff but they always have it!
New metal head gasket and inlet manifold gasket were ordered and are here for 2moro's mission!!

[Dunnedriftin]

Cheers Chris, hope this is the end of all your troubles!

Only way to make business is to provide a good service ;)

[P.s13 silvy]

more posts here chrisie, keep me posted!!

[B&G Extreme Drifting]

Well hello from misty hill of Kiltokyo, seams summer has come early and mist is rising, (I hope the same for the mist that's hanging over this never ending project!) the light of day has made the kiltokyo garage warm a little, but no less cramped to work in but we work with what we have, got some motavation from being at the drift day in mondello on the 8th! So spanners will be back in action 2moro all going well!!!

Tho the hard ship of the fucked head has ment iv to rewrap the exhaust manifold as it got covers in oil and water when taking it off, and if I don't do it now it won't get done!!

And that note a huge thanks to*calicagesracing who came to my help in sorting me out with a new RB20 head, *guys are top sound and down to earth wouldn't have any prob in gettin work done with them...

Also another huge that's to Colom in*www.tridentmnfg.ie who gave the rb20 head a fresh skim, new valve stem oil seals, recut the valves and lapped them back into the head, all in no time at all and even with fast turn around I was always keeped up to date with what was going on and what it needed, it was even delivered back to me on a Saturday great service!!

More thanks to the guys in www.conceptua-tuning.co.uk mightn't be the cheapest place to get stuff but they always have it!
New metal head gasket and inlet manifold gasket were ordered and are here for 2moro's mission!!
c'mon kiltokyo, will ya take the finger out haha. did you make any more progress with monster??hope so.. hurry up with dat caz sensor, my cars sitting up since i took it out to give you a lend :)
hope the firing process goes well for you this time :) nothin grunts like a RB :)

[GTSr32]

Well well guys!!!!!!!!!!!!!!!!!!!!!!

340BHP with a run in map!!! boost set with actuator pressure (1Bar)! with standard injectors and boost controller unplugged.

Happy out!!!!!!!!!!!!!!!!

Give it a run in then 470cc injectors and plug in the boost controller

[calicagesracing]

Nice figures!! You're a happy man now I'd say:cool:

[GTSr32]

Happy out dosnt cover it! I'm over the moon, and thanks for sorting me out with a replacement head that time, car is actually finished
(for now :) )

bumper is painted and fitted interior is done too tho I'm sure I'll find something that I could spend more money on!

[git]

who did the mapping !?

[GTSr32]

Culture did a nice safe run in map for me, wasn't looking for figures just wanted a safe map for runing the the motor, tho must say I'm very happy with the out cum so far, hope that I'll get down to certain from on here for new map with injectors play with cam timing maybe and more boost very soon!

[git]

Culture did a nice safe run in map for me, wasn't looking for figures just wanted a safe map for runing the the motor, tho must say I'm very happy with the out cum so far, hope that I'll get down to certain from on here for new map with injectors play with cam timing maybe and more boost very soon!

track day is it ? why not go with him in the first place could be giving yourself future problems at the mo

[GTSr32]

Lol now won't be getting into mapper bashing!

Tho know where ur coming from!!!

Track day mapped it the first time, and I was 100% happy hence why the car will be going back there again!

It's only a run in map n iv a careful eye over things

[git]

Lol now won't be getting into mapper bashing!

Tho know where ur coming from!!!

Track day mapped it the first time, and I was 100% happy hence why the car will be going back there again!

It's only a run in map n iv a careful eye over things
Ah gwon haha its fun! ah well its up to you dude besta luck with it !

[GTSr32]

Finally its looking like a car again!!!!!!!!!!!!!!!!!!!

http://i73.photobucket.com/albums/i223/106s2rallye/finished.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/enginefinished.jpg

http://i73.photobucket.com/albums/i223/106s2rallye/interiorfinished.jpg

[PeterT]

Gorgeous looking. Hump hump

[driftescort]

Looks sweet lad!

I will have to get some more pics and spec and get it up on my blog some time!

http://r32life.blogspot.com/ ;)

[anto300zx]

fair play to ya chris its stunning now i have to say makes me want another r32 :)

[GTSr32]

cheers lads! just need a GTR grill to finish off the outside

[Dunnedriftin]

glad it worked out well for you chris :)

[Robbie Daly Ps13]

I have 1 lad......! Looking sweet as fook.....!

[GTSr32]

I have 1 lad......! Looking sweet as fook.....!

Sound man! put that down on my account! :D

[mattybyrne2008]

defenitly my favorite 32 in the country and the nicest i reckon..

fairplay to ya man enjoy it!!!

[joeymc]

I have 1 lad......! Looking sweet as fook.....!

no you dont its mine!!

cars lookin savage chris

[Robbie Daly Ps13]

That's fucking mine lol

[joeymc]

lookin good

http://youtu.be/dQd1s6PvpVo

[slithertooth]

Looking great lad, well done

[sc86]

haha your famous stonsie

[Mayo S13]

Realli nice car well done on the build!

[B&G Extreme Drifting]

you owe me a spin in this cracking 32 chris,seen as u never gave me back my Kaz sensor :-)

[Flyinfester]

Lovely R32,love these cars and a real credit to you,what brake is it puttin out now

[James Doyle]

I read from start to finish just there very nice car probably the best example of a 32 in Ireland I have seen so far