View Full Version : project jzx100 mark 2
right i may start a project thread i suppose as everyone is doin it........ :)
it had few bits when i bought it like the kit , intercooler an other bits an bobs....
first was to get it regestired , so that was all grand an got me plates...:)
i said from day one that id do a full respray on it when funds allowed.
heres some pics of when i first got it.
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/13102009119.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/13102009120.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/13102009121.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/552jjkj.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/huiiuiu.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/hjhjhhh.jpg
said id get the front windows tinted on it then, and there was a tint on the front windscreen that was all marked an a savage glare off it so that had to go..
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/17102009124.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/17102009125.jpg
next was to remove all the stickers...
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/018.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/017.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/016.jpg
it then went for nct, jus raised back up the coilovers, was jus after gettin a service so didnt have much to do to it..
standard cat was in it still so it was handy for emmisions.
anyway it flew through:) was delighted first ever car to pass in one go..
althogh he knocked me on the clutch pedal rubber where ya put your foot on was hangin off , and the visor was to big :eek:
after a bit of shit talk from me to him he let me off with it an got a 2 year test:D:D
more pics to follow now;)
next got the smoked lights and got rid of the rear spoiler
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/bmw056.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/bmw055.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/bmw054.jpg
got a bride seat rail for me birthday off herself an had a bride seat from me old s14 ready to stick in...
bought a sparco wheel and boss an put that in aswel...
then gota decat for it so that was bolted in then , made a hugh difference..
with that out was boostin at 1 bar with the full straight through apexi exhaust..
an a savage sound off it there is..
was gettin drivin hard for a while so clutch started to slip a bit so went and ordered an orc twin plate clutch which is a savage job :)
picked up other bits and pieces aswel like gear knob , drift button an got a sweet hks kansai service strut brace off carpo... ta for that ;)
more to come:)
not been bad or anything man but ur actually headin the wrong directionbut each to there own first bad move was removing the stickers:eek:..
not been bad or anything man but ur actually headin the wrong directionbut each to there own first bad move was removing the stickers:eek:..are you off your head????a shopping list down the door,doesnt look nice on anycar,no matter what the sticker say...its tacky out....its like something youd see in max power 97....good move takeing them on.....have you seen the finished product jimmy?
done a deal with my work emotion cr kai for a set of work vs-kf 18x9 an 18x10 in super chrome finish... sweet:D
they stuck out a mile on the rear which i knew they wud , so it was all the more reason to make a start on the bodywork an flare the rear arches an do a full respray...
sum pics of wheels before body work..
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nokian97077-2.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nokian97079-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nokian97078-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nokian97077.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nokian97076.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nokian97073.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nokian97070.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nokian97067.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nokian97068.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nokian97069.jpg
next is bodywork:cool:
not been bad or anything man but ur actually headin the wrong directionbut each to there own first bad move was removing the stickers:eek:..
Are you nuts, why would ya leave a shopping list on the doors, have you seen this car finished, far from the wrong direction. :)
Car looks well niall fair play to you
Your missus car is back in action i should have it out in portlaoise this weekend
my cousin is a panel beater an does top work...
always brought my cars to him an does a savage job:)
he's dear but ya get wat ya pay for;)
his body shop is only a few miles away from me so was ideal to be able to keep an eye on stuff jus ta make sure i was happy wit everything...
brought it in and started to strip it down which we had done in no time..
arch work on the rear was the most work really........
pics
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/017-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/016-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/011-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/012-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/014-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/013-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/015-2.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/002-2.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/001-2.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/003-2.jpg
the car took up the 2 spray booths :eek:
there was the car itself , front bumper , back bumper two side skirts and 4 doors and boot and bonnet lol....
front indicator lights were a bastard for poppin out so had the wings all scratched so needed a good rub down.
was only 1 or 2 small dents is all on the body so was grand , overall body was mint on this car really.
holes were welded shut in bootlid and smoothed off also.
acrhes were trial an error really , but was happy out the way they turned out.. there full metal no fibreglass or anything so will never have a problem there.. all sealed underneath also , so rust will never be a problem.
pics of respray next:)
Fredericks Balls
27-09-10, 21:26
Awesome. When I first saw the respray pics i did wonder was the old colour/look nicer but no way. Original colour was nice but not the same at all!! The only thing I dont love is the tinted rear lights but otherwise it looks fantastic. Arches are animal!!
And the wheels look well wider than 10j's!
And Stevie Wonder, keep the stickers? You mad??!! :eek::p
ordered sum smoked front indicator lights to finish off the out side..
so sum pics after it left the spray booth:)
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/001-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/002-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/006.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/007.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/005.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/008.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/009.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/003-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/004.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/010-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/vbfhnhn.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/nbnjbjh.jpg
ian g sr20
27-09-10, 21:54
nice work lad fair play, some differnce a colour can do for a car looks 100 times nicer with new spray and arches
and this is how it stands now....
took off the sun visor and put on stupid front number plate for now anyway,
never had a front plate an was stopped a good few times so i hav to go to court in november for no plate even though it was left up on window the nite i was stopped...
court for no plate an a sun visor like.. sum joke :mad:
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/008-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/009-2.jpg
think it needs a black visor or sumit accross the top of windscreen wat ye think????
i think it jus looks kinda plain........
as for rear lights im undecided still, if ye look back at old pics see the rear lights, i hate the orange and red, think they look shit...
doin a bit of pricing at the mo for more parts:)
few more gauges maybe an alot of engine work is next.....:cool:
spec list as it is.....
TRUST front mount intercooler
GREDDY hard pipes
APEXI FILTER
APEXI N1 full exhaust system
STAINLESS DECAT/DOWNPIPE
APEXI ECV- exhaust control valve TEIN full adjustable coilovers
WORK VS-KF 18" alloys ,f9", r10"
BN SPORTS front bumper
BN SPORTS sideskirks
BN SPORTS rear bumper
URAS front vented wide fenders
uras smoked indicators
TRD brake pads
GREDDY turbo timer
GREDDY gear knob
HID headlights
BRIDE SEAT AND RAIL
SPARCO STEERING WHEEL
ORC TWIN PLATE CLUTCH
FULL RESPRAY
REAR ARCHES FLARED
prob few more bits i cant think of now...
will keep updated:):D
savage car, like it way better without the sun visor.. looking at it with the dished wheels makes me want dished wheels now :(
200sx-slider
27-09-10, 22:06
all i can say is SWEET as a nut
savage car, like it way better without the sun visor.. looking at it with the dished wheels makes me want dished wheels now :(
cheers lad... ah ya they make a job of big 4 door cars , loads a dish is the way to go:)
@ tweek , nice one. hope it goes well for you lad;)
thanks for the comments guys:cool:
all i can say is SWEET as a nut
sound man:D
gettin some spacers sorted now for the front , need to push the wheels out a small bit...
also need to get the black strips done on the end of the doors , there like plastic/rubber kinda thing so need some special primer before they can be painted...
SPUNKYMUNKY
30-09-10, 17:41
That is one seriously savage car :D
lookin cool go mad with chrome graphics....
must get a look at it some day niall
That is one seriously savage car :D
sound lad :D
lookin cool go mad with chrome graphics....
must get a look at it some day niall
cheers brian, ya hard to know how it would look with graphics ?
ah ill surely be up around cashel sum day;)
1 of the Nicest chaser's in the country at the moment- well its a tight one between yours and the candy apple red one in cork :eek:
Love it Niall, havta see it some time cause im sure the pics are doing it no justice
fairplay on putting all the work in, it looks the tits :cool:
will look luuuurvly with some spacers on the front alrite! sunstrips are GAY! its such a country thing, dont put another one on!
shit son! i take back earlier comments this yoke is a propper pimp rig!!
savage car man im in love :D
how much did the arch work set ya back niall??
was all done at the one time ,respray arch work etc so i dunno wat it would cost , but theres a bit of time in gettin em pefect.......
twin-cam85
07-10-10, 11:08
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/009-2.jpg
looks savage lad....how do you get away with it that low haha
ha, cheers man.. it looks savage low there alright prob jus the way the yard is.... its not too low , i didnt get to drive it fuck all lately , twas taxed for 3 months an was out in it like no more than 5 times:eek: , an the fuckin tax is i think 263 fr 3 months , be makin better use of it next time thats for sure :D
twin-cam85
07-10-10, 13:26
ha, cheers man.. it looks savage low there alright prob jus the way the yard is.... its not too low , i didnt get to drive it fuck all lately , twas taxed for 3 months an was out in it like no more than 5 times:eek: , an the fuckin tax is i think 263 fr 3 months , be makin better use of it next time thats for sure :D
haha mines about the same as that and about a hour after lowering it bumper in shit haha ..ya tax is a joke...throw up some more pictures and engine bay luv these cars
WANGAN-JZX
07-10-10, 14:53
Looks savage.....colour really suits it....want to respray my one in the new year too....not lookin forward to it there a huge fookin car lol! :p
ye they are a big whore arite, took like 5 and half litres of paint an gallon a laquer, sum shine though in the sunlight :cool:
keep lookin back at this car, id love it it looks savage:(
cheers dude ;)
update on the way soon , have loads of bits to fit now, jus to get time to get it into the shed at home an start doin some more work.....
have loads of bits and pieces gathered up now to put in the car, few defi gauges , new boost controller and some other bits and engine parts..
have rails ,put me bride full bucket seat in and trust harness for next year, still waitin on me passanger bride rail to land from japan ,have a bride recliner for passanger side..
plenty of time now to get stuff done over christmas .. well , wen we'r not on the beer lol :):D
will update with pics soon.....
serious job on archs bud looks mint :)
nice love the clolour looks the tits
jeff nelson sileighty
24-12-10, 20:32
fook shes looking savage..would love to have it myself:(
cheers guys....:)
@ rb26s15 , dunno yet lad...
got me passanger bride rail, any1 have a black bride recliner for sale? can trade a mint bride brix against it......
serious mark 2 looks the tits!!!!! 1jz FTMFW!!! :D love the colour looks really well and the wheels are sumtin else!!!
me brother has a jzx100 chaser, feckin in love with mark 2s and chasers!!
Smokey Bear
08-01-11, 02:58
not to overlook the rest of the work, but savage fucking job on the archs!!!!!!!!!!
cheers guys;) yeah delighted how the arches worked out , there perfecto:)
right got in me bride full bucket seat in driver side , along with 6 point harness...
have a brand new bride passanger seat rail ordered from japan , should have that by the weekend hopefully , have another bride here waitin to stick it in..
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97stuff058.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97stuff059.jpg
also got a drift button for the handbrake..
put in me new hpi airfilter , along with some joiners to make it work , had to get a plate to bolt to airfilter so i could join it up to the afm...
can kinda see in pic the new hks kansai service strut brace i got back a few months ago...
also stuck in cold air pipe to air filter...
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97stuff101.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97stuff099.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97stuff102.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97stuff103.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97stuff109.jpg
2 random pics
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97stuff041-1.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97stuff042-1.jpg
colour looks funny in the pics and must say i wasn fond of the colour but is much nicer in person niall.
serious pimp wagon right here..
colour looks funny in the pics and must say i wasn fond of the colour but is much nicer in person niall.
serious pimp wagon right here..
cheers brian ;)
yeah there phone pics, not great quality , must get some proper pics with the camera..
sideways shane
17-01-11, 20:14
you'v done 1 hell of a job with that car lad,lovin the colour and the arches fair dues..good luck with rest of the build
you'v done 1 hell of a job with that car lad,lovin the colour and the arches fair dues..good luck with rest of the build
thanks lad ,
is there ever a time when your actually finished spendin money on a car lol :D
Fredericks Balls
17-01-11, 20:37
Cool update! 6 point harness though? For the road? My head would be wrecked haha
Seat and harness looks nice though
Cool update! 6 point harness though? For the road? My head would be wrecked haha
Seat and harness looks nice though
sound
a yeah , still have normal seat belt if needed , harness will be needed for track at some stage ;):)
hopefully should have a roll cage sorted soon , and have a few more defi gauges arriving soon...:)
few other pics i had
threw in a new greddy gear knob , the drift button , and deep dished sparco steering wheel.........
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/pics066.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/pics067.jpg
twin-cam85
18-01-11, 21:06
very cool car...seat is very high or is it just me
very cool car...seat is very high or is it just me
sound , yeah it looks high there alright but its perfect though ,must be jus the pic , im bout 6 foot 3 , an not near the roof , its spot on , theres serious room in them twards s-bodys.. :)
drift student
18-01-11, 21:14
love this car...... first time seeing it was in killarney durin the lakes i think.
was dark blue back then....
love this car...... first time seeing it was in killarney durin the lakes i think.
was dark blue back then....
yep thats right lad was navy then alright ..
new bride passanger rail landed yesterday :)
so bolted it to me bride an stuck it in earlier on .....
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97004.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97005.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97008.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/n97009.jpg
have brand new greddy boost controller here to go in along with defis an the control unit..
jus dunno where to put them though ? any ideas ?
turbo timer is on top of steering wheel and mite move that, also thinkin of gettin tein edfc controller so that would have to go somewhere aswel......
How much did the rail set ya back niall.
alot lad , dunno exactly , had to wait few months for it ....
very slow for some reason , have it no so fuck it. no rush anyway loads too do..
few bits been gathering up over the last while......
jus hooked up the defi control unit earlier , an got the boost gauge in...
got a brand new greddy boost controller aswel , so jus have to finish puttin that in now
also got a new power enterprise timing belt , that an a service is the next job too..
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/pspspsppsps074.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/pspspsppsps075.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/pspspsppsps071.jpg
decisions decisions !!:) where to put the gauges ...
i think they will look well here...
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/pspspsppsps076.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/pspspsppsps072.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/pspspsppsps073.jpg
lookin unreal Nial best of luck with it
lookin unreal Nial best of luck with it
cheers lad , yeah its comin onn,...
Where'd you get the timing belt? Expensive? :)
Boost gauge above the steering wheel on the plastic cover, and the rest running down the side of the stereo on the passenger side. :D
Where'd you get the timing belt? Expensive? :)
Boost gauge above the steering wheel on the plastic cover, and the rest running down the side of the stereo on the passenger side. :D
done a deal wit fella on driftworks with a gauge i had an some money .. but i seen em on rhd , think about 80 - 100 euro on there...
ya i was gonna put boost to the right , but then was thinkin i couldn stick it right in the corner cause wen i put in a cage the gauge would be in behind it .. or else if i move it out a bit it will be in the way to see out ha ,.. il see
maybe it might be ok..
as for down side of the dash i didnt even think of that lad cheers ;) , must have a look again tomorrow , it might work . woud look cool alright !
Oh right, must get one as well at some stage.
The boost gauge in mine was up on the right, but I moved to the plastic behind the steering wheel in front of the clocks. It's handy because it blocks out the airbag warning light. :D I had it on the side of the dash but never mounted it properly and stuck it where it is now just for the easy life. lol
Oh right, must get one as well at some stage.
The boost gauge in mine was up on the right, but I moved to the plastic behind the steering wheel in front of the clocks. It's handy because it blocks out the airbag warning light. :D I had it on the side of the dash but never mounted it properly and stuck it where it is now just for the easy life. lol
haha , sound , yeah i have few options now , will hav a look 2moro , jus wanna stick them somwhere an leave em , hate goin movin shit afterwards.....
wonderin should i paint the door strips .... or does the black kinda break it up , wat do ye think ? im undecided what to do with them......
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/009.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/003-1.jpg
some amount of crap in the back of these yokes !!
fucked out all the scrap like the jack an all the brackets , and all the sat nav setup !!!
fit some load of wheels in the boot now though :) jus need ta tidy it up now an spray inside..
also found a few cables runnin from a switch in the front back to the boot , possibly used for turning off number plate lights or something weird like that.
must have a better look tomorrow!
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/carrrrr089.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/carrrrr091.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/carrrrr090.jpg
think ill spray it black , jus a test !!!
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/carrrrr092.jpg
Diesel-Dick
10-02-11, 00:10
jaysus uve made sum job of this car since u got it man fair play! :cool:
jaysus uve made sum job of this car since u got it man fair play! :cool:
thanks dude ;)
Watch your rear quarters don't get dented from the inside out from stuff flying around the boot. Three 18's fit perfectly in the boot with all the plastic crap still in it. :)
Fredericks Balls
10-02-11, 07:36
:eek: holy shit, is the tank there as standard?? Must take a picture of my boot!
Looks sweet, i'd consider removing the chrome window surrounds, although they dont look bad. the door strips are nice though, break up the colour and go with the wheels. :)
EDIT: Actually there is something i'm not liking but I couldn't put my finger on it. The window surrounds are actually grand, they suit it perfect too with the wheels etc. Its the tint on the front windows im not keen on. Otherwise its spot on! Looks gorgeous though all the same
Watch your rear quarters don't get dented from the inside out from stuff flying around the boot. Three 18's fit perfectly in the boot with all the plastic crap still in it. :)
yeah it feckin happened one the lads , threw in a jack an it hopped off one side , left a nice mark too....
gonna make up something light that i can strap in a jack an wheels with ease and not worry bout them flying around when gowling :)
:eek: holy shit, is the tank there as standard?? Must take a picture of my boot!
Looks sweet, i'd consider removing the chrome window surrounds, although they dont look bad. the door strips are nice though, break up the colour and go with the wheels. :)
EDIT: Actually there is something i'm not liking but I couldn't put my finger on it. The window surrounds are actually grand, they suit it perfect too with the wheels etc. Its the tint on the front windows im not keen on. Otherwise its spot on! Looks gorgeous though all the same
sure is yeah ;) big fucker of a tank..
yeah its been bugging me too , was thinkin off gettin the black strips painted , cause it was part of the deal , so wont cost me anything..
but then it may look to blue cause its such a big car !!
i think i might remove front tints alright , an put on something legal.
ill take a pic with fronts down to get an idea !
I want this car
thanks ste ha, ill take that at as a compliment ;)
Making good progress, I wasnt overly gone on the colour at the start but your making it work!! Would love to own a JZX some time they have everything you want.
Haha bobby pure foolin not tien down the jack and it wreckin the quaters for days!
Making good progress, I wasnt overly gone on the colour at the start but your making it work!! Would love to own a JZX some time they have everything you want.
cheers lad , a yeah happy out how its comin on :)
Haha bobby pure foolin not tien down the jack and it wreckin the quaters for days!
o stop, i was laughin while writing it there , it goin bang bang , too lazy to get out an strap it down,,,,,:D
Fredericks Balls
10-02-11, 12:13
yeah it feckin happened one the lads , threw in a jack an it hopped off one side , left a nice mark too....
gonna make up something light that i can strap in a jack an wheels with ease and not worry bout them flying around when gowling :)
sure is yeah ;) big fucker of a tank..
yeah its been bugging me too , was thinkin off gettin the black strips painted , cause it was part of the deal , so wont cost me anything..
but then it may look to blue cause its such a big car !!
i think i might remove front tints alright , an put on something legal.
ill take a pic with fronts down to get an idea !
thanks ste ha, ill take that at as a compliment ;)
Nah, I reckon the little bits of chrome and the wheels too, break up the colour fine. Take a snap of it with the front windows down for reference! (im not gone of front tints on any car, not just yours!)
For the jack, what about bolting four small mounting hooks somewhere in the boot and using heavy duty rubber straps...
The jack goes on the floor behind the drivers seat. :) My quarters have dents either side from someting hitting them.
ian g sr20
10-02-11, 13:51
car looks savage with ya lad fair play , some difference from when u got it
car looks savage with ya lad fair play , some difference from when u got it
thanks dude ;)
this car is savage and i love those wheels :cool:
thanks eric ;)
got all inside the boot sprayed an laquered, looks the job..
pics to follow.
jus ordering stuff from japan .. argh trd stuff is bloody dear !!
went about tidying the boot and getting rid of any unesecary crap...
sprayed inside the boot etc ..
first pic when i started..
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/carrrrr090.jpg
finished
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/095.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/096.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/097.jpg
made up a small rachet strap jobby for holdin down the wheels in the boot..
can be used for 1 wheel or for 2 wheels for track days gowling nights etc :D
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/098.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/099.jpg
an me 18x10 te37's fit absolutely sweet.............:) with some stretch anyway:cool:
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/100.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/101.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/104.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/102.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/103.jpg
That last pic is cool lad!! the volks are savage on the back!!:D
That last pic is cool lad!! the volks are savage on the back!!:D
ya , i'd love to pic up another 2 , cant find them anywhere though , could swap around all 4 wheels then .. they look well on it alright ;)
saweeeeeeeeet, picked up a power fc the other day , curently on the way from japland...
Good stuff. Off for a map then?
I really like the TE's possibly more than the Work's if I'm been honest,
Good stuff. Off for a map then?
yep , be mapped soon enough hopefully.. did u map yours before sellin the pfc ? wat power it make ?
I really like the TE's possibly more than the Work's if I'm been honest,
ya they look well alright , gonna throw on 2 on the one side for the crack , see how it looks..
Mine was mapped for about a year before I sold the ECU, it made 322bhp and 326lbs, good for 272kmh. :)
Administrator
18-02-11, 23:18
Stick the better sized V's up front and space out the TE's a bit and take some shots please!
sideways shane
18-02-11, 23:45
lovely car lad the work yav put in2 it is unreal:) fair dues
Looks soooooooo much better than when you got it, fair play :cool:
thanks guys ;)
@Darragh , will do , once i get it out of the garage.. half the bloody thing is pulled apart :o
Administrator
19-02-11, 00:57
thanks guys ;)
@Darragh , will do , once i get it out of the garage.. half the bloody thing is pulled apart :o
Haha I know the feeling! Good sized TE37s are sooooo fucking cool!
mick-skyline
19-02-11, 04:59
niall i know where theres 17x10 te's in white if there any use??
niall i know where theres 17x10 te's in white if there any use??
really ? think 17's would look too small though ...
wats the offset on them ? is there a big kick in on the spokes like mine ?
pm me a price anyway ;) sound
mick-skyline
19-02-11, 16:45
taken from his thread on skylineowners
Volk Te37 in white 17x10 with a 0 offset. Look mean on a 32.
Price 1200
only pic too
http://www.skylineowners.com/forum/customprofilepics/profilepic9025_1.gif
finished fitting the boost controller over the weekend
also put in commander holder , an greddy top rad pipe landed so can stick in defi water temp gauge an that next...
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmmm068.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmmm069.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmmm059.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmmm060.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmmm076.jpg
picked up a pair of carbon door pillar trims , so put them on.
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm048.jpg
went at gettin rid of the sound deadening , got all where the back seats were done..
jus small bit to finish cleaning..
also tidyed up all the wiring in the back , was running criss cross all over the place behind the back seat..
jus 1 single run of wires up either side now taped up an tidy....
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm063.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm064.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm065.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm067.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm068.jpg
plastic still on the door trims even :eek: mint :cool:
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm066.jpg
few randoms , and windows down for fred , wat ya think ?
blitz on for now gettin tyres sorted for the front..
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm049.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm056.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm055.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm054.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm053.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm052.jpg
Lose the front tints and pics of the headlights you bitch :p
Lose the front tints and pics of the headlights you bitch :p
:p
headlight came up fairly well , looks almost mint when lights are off.
not so good with lights on :( see all the little kinda cracks....
lights on,
passanger
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm051.jpg
drivers
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/mmmmmmm050.jpg
Say there was a bulb in that side at one stage that was too high a temp and distorted the finish on the glass with the heat!
You'd prob sort that from the inside if you split the lamp via the oven way of doing it!
I wouldnt be gentle enough to do something like that myself!
Say there was a bulb in that side at one stage that was too high a temp and distorted the finish on the glass with the heat!
You'd prob sort that from the inside if you split the lamp via the oven way of doing it!
I wouldnt be gentle enough to do something like that myself!
sound , will whip it off tomorrow and get a better look to see how hard it would be to remove the front part..
you know there plastic mick now yeah ? jus u said glass above ?
i dunno does this happen to glass too ???
youve changed that car from nice to awesone man...
fair play...
Sorry yeah I meant to say plastic!Hence the burn!
Sorry yeah I meant to say plastic!Hence the burn!
ah cool i thought so , cheers ;)
youve changed that car from nice to awesone man...
fair play...
thanks dude :)
cork kouki
26-02-11, 23:11
Been following this tread for a while now & fuck me lad she is sweet, making a serious job outa it, no corners bien cut. Fair play lad
Been following this tread for a while now & fuck me lad she is sweet, making a serious job outa it, no corners bien cut. Fair play lad
thanks , much appreciated ;)
got some more bits sorted .. pics ta follow. an new tyres on the way.
cant get replacement plastic fronts for the headlights anyway :o
goin to tax it in the morn , 263 euro for 3 months :mad::mad::(:eek:
goin to tax it in the morn , 263 euro for 3 months :mad::mad::(:eek:
possible the worst thing about them.. iv another month left on my tax
possible the worst thing about them.. iv another month left on my tax
i know , its sick.. its out with 6 months now so better get it sorted...
some dose if got caught an told had to be back taxed...
been doin few small bits lately , savin a few pound for a load of tyres so notin major happening..
jus tidying up the rear, moved the speaker an stuff to spray up around it and got rid of all the carpet stuff an shelf an that.
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/fonepics078.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/fonepics077.jpg
didnt like this so mounted it from underneath.. put some black material over the speaker , actually a ripped up tshirt ha..
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/fonepics079.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/fonepics080.jpg
....................
rippin up the old door card , get it smooth to make moulds to make proper carbon door cards..
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/fonepics083.jpg
http://i914.photobucket.com/albums/ac342/NIALL-PHOTOS/fonepics084.jpg
nearly finished , pics soon...
The door cards could be cool. When will you have the moulds done? What's the plan for the car anyways, Prodrift?
The door cards could be cool. When will you have the moulds done? What's the plan for the car anyways, Prodrift?
dunno lad , bit of work in them so see how it goes..
maybe yeah , no time soon though , waitin on power fc , then get it mapped .. gonna try get a cage sorted then , so see how it goes. few practice days soon hopefully anyway.....
Loadsa money. :) There is some difference in fuel consumption with them mapped in fairness. The rest of your plans are the same as mine really. A bit of twinning sometime?? :D
Loadsa money. :) There is some difference in fuel consumption with them mapped in fairness. The rest of your plans are the same as mine really. A bit of twinning sometime?? :D
ah yeeeee , without a doubt :) soon hopefully.. i dont have a job :o
Oh right, that sucks.Hopefully that changes sometime soon, then loads of drifting can happen.
180sx drifter
15-04-11, 21:45
Looks savage lad door cards will b mint! wer the molds hard to make?
anyone interested in swappin me a nice black bride recliner with the writing for my bride bucket seat ? must be mint .... mine has no rips or anything..
few pics in this thread...
jeff nelson sileighty
12-08-11, 09:35
anyone interested in swappin me a nice black bride recliner with the writing for my bride bucket seat ? must be mint .... mine has no rips or anything..
few pics in this thread...
Just so ya know man if youre looking at entering pd in the future they only allow fixed back seats so no recliners
jesus yeah was forgettin bout that , might hold on to it so.. might jus buy a recliner then an swap them whenever i need ;)
the full bucket is a cunt a long journeys ...
anyone on here work in toyota or know of anyone that works there ?????
need a few bits .......
also anyone know of a pair of TE37's for sale ? white 18x9.5 et22 would be sweet !!!!
mattybyrne2008
05-10-11, 00:19
i work in toyota man pm me whatever ya want??
i work in toyota man pm me whatever ya want??
pm'd lad..........
have a contact in NZ that can get oem toyota parts much cheaper than here hes the part manager in toyota, i got a qoute for parts came and it came to 200 delivered, toyota ireland wanted 380 for the same parts and i would have to wait to get them in for my jzx 2!pm me if u want his details!!
have a contact in NZ that can get oem toyota parts much cheaper than here hes the part manager in toyota, i got a qoute for parts came and it came to 200 delivered, toyota ireland wanted 380 for the same parts and i would have to wait to get them in for my jzx 2!pm me if u want his details!!
cheers lad , im jus waitin on some parts back from a few different guys..
but id say thats the same guy as a good few people are using for parts , one the lads ordered timing belt parts etc for his jzx , and that guy sent most the wrong stuff and then wouldn take them back , he then had to go through toyota , ended up costing him a fortune.... dont fancy that lol :eek:
Niall lad yr doin a serious job. Lads this car in the flesh is simply amazing. Love the track spec route yr going with it but i'd say you'll be kicking yrself on the next charity drive. The noise will be chronic like mine! Gonna look shit hot and go like stink tho! Fair fu*ks man!!
cheers dude....... tax was out last week there so shes now parked up for the winter , it will be pulled apart .. good few things i wanna do, need to do the timing belt , do a service , gonna change all oils diff box etc and give it a good check over .
gonna get new rear topmounts as 1 possibly both are slightly tappin..
get some uprated anti roll bars..
get solid subframe bushes.
got some gauges to stick in , and gonna look into get a bigger turbo..
hopefully anyway thats the plan but ill see wat happens , work is gone to fuck now so money is tight. i might even throw this up for sale an see wat offers i get .... feel free anyone to make me an offer ;)
wouldn mind another s14 for doin some driftin on the roads an track !!!
looking very well now :cool:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.